How long things take: the machine about 2 weeks, bits and small tools about a week, and one item ships in a few days from a US warehouse. Australia is the same wait. Here is whyMachine about 2 weeks. Why?
Free shipping to the US and Australia · 30 days to return it · Spare parts free for 12 months
0

Watch and jewellery tools

Movement holders, hand pressers, hammers, ball vises and the small drivers that actually fit watch screws.

13 products

  • Ten taps laid out with sizes marked from M1.0 to M3.5The ten taps fanned out beside their case

    Micro tap set, M1 to M3.5, ten pieces

    You drilled the hole. Now something has to screw into it. Ten machine screw taps - M1.0, M1.2, M1.4, M1.6, M1.7, M1.8, M2.0, M2.5, M3.0 and...

    $14.99 USD
    $14.99 USD
  • Mini bench vise on its round swivel base, jaws tiltedThe vise held in a hand, showing the ball joint and locking lever

    Mini bench vise, 1 inch jaws, swivel base

    A vise bolted flat to the bench holds the work in one position. Then the job needs the piece tilted thirty degrees toward you, and you...

    $99.00 USD
    $99.00 USD
  • Fractal vise, stainless steel, jaws closedFractal vise jaw blades taking the shape of a part

    Fractal Vise, stainless steel

    Some parts have no flat sides. A watch case, a ring, a cast bracket, a piece of driftwood. Put one of those in an ordinary vise...

    $159.00 USD
    $159.00 USD
  • Engraving ball vise with parallel jaws in its baseBall vise tilted in the base to show the rotation

    Engraving ball vise, 3 or 5 inch

    You are setting a stone, or cutting a letter into a signet ring, and the part keeps shifting under the graver. A ball vise fixes that....

    $129.00 USD
    $129.00 USD
  • 55-piece precision screwdriver set in its trayMagnetic bits, Phillips Torx hex and Pentalobe

    Precision Screwdriver Set — 55 pieces, magnetic

    One handle, 54 bits, and a magnet in the shaft that holds the bit and then holds the screw. For the work that happens beside the...

    $39.00 USD
    $39.00 USD
  • Seven mini hex keys on a ring, 0.7 to 3 mmHex key sizes laid out

    Mini Hex Key Set — 0.7 to 3 mm, 7 pieces

    The grub screws on a machine this size are smaller than the keys most people own. Our own drill press arrives with a single 3 mm...

    $8.99 USD
    $8.99 USD
  • Watchmaker's eye loupeMagnifications in the range

    Watchmaker's eye loupe

    A handheld loupe costs you a hand. This one wedges into the eye socket and stays there, and that is the whole reason watchmakers use this...

    $14.99 USD
    $14.99 USD
  • Three triplet loupes side by side, 10x, 20x and 30x, all with a 21 mm lensLooking through the loupe at the gear train of a watch movement

    Jeweller's loupe, triplet, 21 mm

    You drilled the hole. Is the edge clean, or did the bit tear out on the way through? At arm's length every hole looks fine. That...

    $16.99 USD
    $16.99 USD