-
Diamond Drill Bits for Glass, Sea Glass, Stone and Shell, 10 of One Size, 2.35 mm Shank
For the materials a twist drill cannot touch. Glass, stone, sea shell, mother of pearl, ceramic, tile, bone, and the hard beads used in jewelry. A...
$16.99 USD$16.99 USD -
Center Drill 1.5 mm Tip for Mini Drill Press
A twist drill set down on a flat face skates before it bites. On a small press you see it as a hole that lands half...
$8.99 USD$8.99 USD -
Diamond Needle File Set, 10 Pieces
You drilled the hole. Now there is a burr on the far side, and a fingernail catches on it. That is what these are for. Ten...
$19.99 USD$19.99 USD -
PCB Micro Drill Bits, 3.175 mm Shank, 10 of One Size
Ten bits of the size you actually keep breaking. Every assortment set has the same problem: you snap two 0.8 mm bits on a Saturday and...
$12.99 USD$12.99 USD -
Cordless Rotary Tool Pen, 3 Speeds, Engraving
The drill press holds the work still and brings the tool down. Sometimes you need the opposite: the work stays where it is and the tool...
$34.99 USD$34.99 USD -
Sanding Drum Set for Rotary Tools, 102 Pieces
A file cuts flat. A sanding drum cuts round, which is what you need the moment a hole is the wrong shape rather than the wrong...
$16.99 USD$16.99 USD -
PCB Micro Drill Bit Set, 10 Pieces, 1/8 in Shank
Our other bit packs give you ten of one size, which is what you want once you know the size. This is for before you know...
$21.99 USD$21.99 USD -
Fine Drilling Starter Set: PCB Bits, Diamond Bits, Cobalt Bits and Center Drill
Four packs of bits that cover most small drilling, from circuit boards to glass and shell. Spot the hole first, then pick the bit for the...
$44.99 USD$44.99 USD
