How long things take: the machine about 2 weeks, bits and small tools about a week, and one item ships in a few days from a US warehouse. Australia is the same wait. Here is whyMachine about 2 weeks. Why?
Free shipping to the US and Australia · 30 days to return it · Spare parts free for 12 months
0

Just added

The most recent things we put on the shelf. We add a tool when we have found one worth selling and know what it does badly as well as what it does well, so this shelf moves slowly on purpose.

6 products

  • Three triplet loupes side by side, 10x, 20x and 30x, all with a 21 mm lensLooking through the loupe at the gear train of a watch movement

    Jeweller's loupe, triplet, 21 mm

    You drilled the hole. Is the edge clean, or did the bit tear out on the way through? At arm's length every hole looks fine. That...

    $16.99 USD
    $16.99 USD
  • T-handle chuck key for a 0.3 to 4 mm chuckThe key seen from the pinion end, teeth and pilot spigot visible

    Chuck key for the 0.3 to 4 mm chuck

    The key lives in a drawer, the drawer gets tidied, and the chuck is now a thing you cannot open. That is the whole reason this...

    $5.99 USD
    $5.99 USD
  • Mini bench vise on its round swivel base, jaws tiltedThe vise held in a hand, showing the ball joint and locking lever

    Mini bench vise, 1 inch jaws, swivel base

    A vise bolted flat to the bench holds the work in one position. Then the job needs the piece tilted thirty degrees toward you, and you...

    $99.00 USD
    $99.00 USD
  • Horned bench anvil, cast body with a polished flat face, square hardy hole and four bolt holes through the splayed feetSide view of the horned bench anvil with dimensions: 128 mm overall, 75 mm face, 60 mm tall, 83 mm base, 6 mm feet

    Horned bench anvil, 128 mm

    You are closing a rivet on a watch strap, or bringing a ring back round after it went oval in a drawer. A flat bench block...

    $56.00 USD
    $56.00 USD
  • The hammer in the hand for scaleThe hammer head, hard and soft faces

    Watchmaker's hammer, soft and hard faces

    A small double-headed hammer for the jobs where a normal hammer would wreck the part. Tapping a spring bar home, seating a pin in a bracelet...

    $9.99 USD
    $9.99 USD
  • Diamond-tipped drill bits laid out in a rowDiamond-tipped bits with 2.35 mm shanks

    Diamond-tipped drill bits — 10 of one size

    For the materials a twist drill cannot touch. Glass, stone, sea shell, mother of pearl, ceramic, tile, bone, and the hard beads used in jewellery. A...

    $16.99 USD
    $16.99 USD