{"title":"Vises and clamps","description":"\u003cp\u003eHolding the work still, which is most of the job. Vises that bolt to the drill press, bench vises that clamp to the desk edge, hand vises, brass watch and engraving vises, and a horned bench anvil for when the part needs a tap with a hammer.\u003c\/p\u003e","products":[{"product_id":"clamp-on-bench-vise","title":"Clamp-On Bench Vise, Small Table Vise","description":"\u003cp\u003e\u003cstrong\u003eAn aluminum vise that clamps to the edge of a desk and comes off again in ten seconds.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNot everybody wants a vise bolted to the furniture. This one screws onto the lip of a table, holds the work, and goes back in the drawer when the kitchen table has to be a kitchen table again.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum body, screw clamp\u003c\/strong\u003e for table edges up to roughly an inch and a half.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwivels\u003c\/strong\u003e so you can turn the work toward you rather than turning yourself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight\u003c\/strong\u003e, so it moves from bench to drawer to kitchen table without effort.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThe two knobs\u003c\/h3\u003e\u003cp\u003eThere are only two and they do different things. The one on the screw opens and closes the jaws. The one underneath clamps the whole vise to the table. People tighten the wrong one, find the vise still moving, and tighten it harder - it is worth knowing which is which before you start.\u003c\/p\u003e\u003cp\u003eThe jaws open from 3 to 28 mm. The base takes a table top from nothing up to 35 mm thick.\u003c\/p\u003e\u003ch3\u003eWhat it is for\u003c\/h3\u003e\u003cp\u003eHolding while you file, solder, glue, sand or inspect. Hand work, in other words. It is the vise you want on the bench next to the press.\u003c\/p\u003e\u003cp\u003eBench vise - not for use under a spinning bit. For drilling, use the brass vise or the drill press vise.\u003c\/p\u003e\u003cp\u003eIt is included in the Watchmaker Kit.\u003c\/p\u003e\u003ch3\u003eDelivery\u003c\/h3\u003e\u003cp\u003eFree and tracked, to the United States, Australia, New Zealand and Canada. \u003cstrong\u003eOne to two weeks.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"Default Title","offer_id":50485647671487,"sku":"MB-VISE-CLAMP","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Se0d8b861bcc846d397f576964de5a9b8Z.webp?v=1789511454"},{"product_id":"drill-press-vise","title":"Drill Press Vise for a Mini Drill Press","description":"\u003cp\u003e\u003cstrong\u003eA hard-jawed vise sized for the machine, with machined parallel faces and a screw feed.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA vise that is fixed to the same lump of metal as the column is the single biggest thing you can do for hole position on a small press. Nothing shifts between the mark and the hole because nothing can.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sccccf62faab141e19e6d4bcc7a6e0b497.webp?v=1789511586\" alt=\"Drill press vise jaws\" width=\"800\" height=\"800\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachined jaws, screw feed.\u003c\/strong\u003e Parallel faces, a positive clamp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStacks on the XY stage\u003c\/strong\u003e if you add one later.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sc3c0e4c35aa5411398d4294ee0be85bdT.webp?v=1789511586\" alt=\"Drill press vise holding a small part\" width=\"800\" height=\"800\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eMounting\u003c\/h3\u003e\n\u003cp\u003eThe stock drill press base has one 5 mm chamfered through-hole in the center, with no thread, so the vise needs an adapter plate to bolt down. To bolt the vise under the chuck, add the 120 × 150 mm base plate: it replaces the stock base and carries the mounting holes.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sd053dfe7a3cd4ee2a76ba7284699fc7aZ.webp?v=1789511586\" alt=\"Drill press vise, screw feed\" width=\"800\" height=\"800\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eTake 15% off this vise with a drill press\u003c\/h3\u003e\n\u003cp\u003eBuy it in the same order as any of our three drill presses and this vise drops from $59 to $50.15. The discount applies by itself in the cart - there is no code to remember.\u003c\/p\u003e\n\u003ch3\u003eWhich vise should you buy\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eThis one\u003c\/strong\u003e if you are drilling metal and want a firm grip and a hard jaw.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe brass one\u003c\/strong\u003e if the work is soft or finished and you cannot afford a mark - watch plates, dials, small castings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe bench vises\u003c\/strong\u003e - rotating, fractal, hand, clamp-on, swivel, the ball vise and the toolmaker's vise - if you want something for hand work beside the machine. None of those belongs under the bit.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked, to the United States, Australia, New Zealand and Canada. \u003cstrong\u003eOne to two weeks.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"Silver","offer_id":50485629485247,"sku":"MB-VISE-DP","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S66f869285c774edd956041ff26588569k.webp?v=1789511586"},{"product_id":"swivel-vise-360","title":"Swivel Bench Vise, 360 Degree Rotating","description":"\u003cp\u003e\u003cstrong\u003eA small vise that turns.\u003c\/strong\u003e Lock the base, clamp the part, then rotate the whole thing to bring the next face toward you instead of unclamping and starting again.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S06f7dc5ba1c447da9ff9783c1ab72706j.webp?v=1789512141\" alt=\"Swivel vise locking lever\" width=\"800\" height=\"800\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e360 degrees of rotation\u003c\/strong\u003e, locked with one lever.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamps or bolts down\u003c\/strong\u003e depending on your bench.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade for small work\u003c\/strong\u003e: watch cases, jewelry, model parts, connectors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sd218b782c19b4b49871798493f63eec7A.webp?v=1789512140\" alt=\"Swivel vise holding a small part\" width=\"800\" height=\"800\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eWhere it helps\u003c\/h3\u003e\n\u003cp\u003eAnything you have to work around rather than straight down onto. Soldering a joint on two sides, filing a bezel, inspecting a part under a loupe from three angles. You set the grip once and the part stops being something you fumble with.\u003c\/p\u003e\n\u003cp\u003eThe swivel is for positioning between operations. Bench vise - not for use under a spinning bit; for drilling, use a vise that bolts to the base.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked, to the United States, Australia, New Zealand and Canada. \u003cstrong\u003eOne to two weeks.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"Default Title","offer_id":50485638168767,"sku":"MB-VISE-SW360","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Scd5115155b9f4023aaaa056b95c87c52l.webp?v=1789512140"},{"product_id":"hand-vise-brass-jaws","title":"Hand Vise with Brass Jaws, Jewelers Pin Vise for Small Parts and Watch Repair","description":"\u003cp\u003e\u003cstrong\u003eA vise you hold, with brass jaws that grip the part without marking it.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Se3d5134f3fef40f08a106133e59bd911v.webp?v=1789512063\" alt=\"Brass jaws holding a small part\" width=\"800\" height=\"800\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eSome work never goes near the drill press. You are filing a screw head, soldering a link, deburring a bezel, turning something over under a loupe. For that you want the work in your hand, not bolted to a table across the room.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sc1d2bb2cf871462b9819c70723c98af7t.webp?v=1789512062\" alt=\"Hand vise thumbscrew adjustment\" width=\"800\" height=\"800\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrass jaws.\u003c\/strong\u003e Brass is softer than steel, silver, gold and a watch plate, so the jaw gives up before your work does.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable opening\u003c\/strong\u003e with a thumbscrew, one-handed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall enough to work in.\u003c\/strong\u003e It fits in a palm and it fits in a drawer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S3587f392ab64427db547f06b78cfee4fC.webp?v=1789512062\" alt=\"Hand vise in the palm of a hand\" width=\"800\" height=\"800\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eA bench companion\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHand vise - not for use under a spinning bit.\u003c\/strong\u003e For drilling, use the drill press vise or the brass vise with the XY stage.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked, to the United States, Australia, New Zealand and Canada. \u003cstrong\u003eOne to two weeks.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"GRAY","offer_id":50485634793663,"sku":"MB-VISE-HAND","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S9c371181d0974d57af17f32231e946a8a.webp?v=1789512062"},{"product_id":"brass-micro-vise-xy","title":"Brass Micro Vise with XY Stage for Drill Press","description":"\u003cp\u003e\u003cstrong\u003eThe same brass vise, sitting on a two-axis stage with fine-adjustment screws.\u003c\/strong\u003e You clamp the part once and then move it under the bit instead of unclamping and guessing.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S8580ad7fe2b240d8aee1aaa31eb39037B.webp?v=1789512041\" alt=\"XY stage lead screws under the brass vise\" width=\"1304\" height=\"1287\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the piece that turns a drill press into something you can put a row of evenly spaced holes into. Set the first hole, wind the screw a known amount, drill the second.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S27c7a1342c034af7915c9cc54a8354020.webp?v=1789512040\" alt=\"Brass jaws holding a watch plate\" width=\"1000\" height=\"1145\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrass vise on a machined XY platform.\u003c\/strong\u003e Two lead screws, one per axis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for watch and instrument work\u003c\/strong\u003e: plates, dials, small brass, anything where the second hole has to relate to the first.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sf9fae3438be04fbfb235b9d0913e24c1Y.webp?v=1789512040\" alt=\"Brass vise with XY stage, side view\" width=\"1000\" height=\"1213\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eMounting\u003c\/h3\u003e\n\u003cp\u003eThe stock drill press base has one 5 mm chamfered through-hole in the center, with no thread, so the stage needs an adapter plate - a small tapped plate between the base and the stage - to bolt down.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked, to the United States, Australia, New Zealand and Canada. \u003cstrong\u003eTwo to three weeks.\u003c\/strong\u003e This one is heavier than most of what we sell and comes from the workshop.\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"flat vise","offer_id":50485643673791,"sku":"MB-VISE-BRASS-XY","price":147.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S6521becfa6a44c35bd2d394ce00c4ed9z.webp?v=1789512041"},{"product_id":"rotating-bench-vise-1-2","title":"Rotating Bench Vise, 1.2 inch Jaws","description":"\u003cp\u003e\u003cstrong\u003eFree with this vise until Dec 2: a 6-piece anti-static tweezer set\u003c\/strong\u003e (US$14.99 in our shop), for picking up the small parts you hold in it. It ships in its own small parcel.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S6f30fb97b4364e32ae9660a31f7f6e42V.webp?v=1789528599\" alt=\"The vise held in a hand, showing its size\" width=\"800\" height=\"800\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree tracked delivery\u003c\/strong\u003e to the US, Australia, New Zealand and Canada.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30 days to change your mind:\u003c\/strong\u003e send it back and the price of the vise comes back in full.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReal 304 stainless,\u003c\/strong\u003e 400 g, with a base that turns and tilts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S8655c05ef5cb47f2b029ec3931e457041.webp?v=1789528599\" alt=\"Swivel base and brass locking thumbscrew\" width=\"800\" height=\"800\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA stainless vise that turns the work instead of making you turn around it.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e304 stainless, 400 grams in the hand, and a base that swivels a full circle and locks where you put it. This is the vise you keep beside the press for the work you do by hand - setting a stone, filing a case back, soldering a joint, inspecting a movement under a loupe.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Se34dfefc8d5249efaa4316852f62c955a.webp?v=1789528599\" alt=\"Jaws open, showing the 30 mm capacity\" width=\"800\" height=\"800\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eIt moves in two directions, not one\u003c\/h3\u003e\n\u003cp\u003eThe round base turns 360 degrees. Separately, the whole vise head rides on a horizontal pin between two brass balls, so it also \u003cstrong\u003etilts\u003c\/strong\u003e - you lay the work over toward you instead of bending over it.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sdaca878a0fd04bc4a617cf2d2ba01105g.webp?v=1789528599\" alt=\"The vise from the side\" width=\"800\" height=\"800\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eThe numbers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJaw width 30 mm (1.2 inch)\u003c\/strong\u003e, opening to 30 mm, clamping depth 17 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e304 stainless throughout.\u003c\/strong\u003e Not painted cast iron with a chrome cap.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase 60 mm, 360 degrees,\u003c\/strong\u003e locked with a brass thumbscrew.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e92 mm long, 48 mm tall closed. 400 g.\u003c\/strong\u003e Heavy for its size, and that is the point - mass is what stops a small vise walking across the bench.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere it fits in\u003c\/h3\u003e\n\u003cp\u003eThis is a bench tool for hand work. Under a spinning bit, use the drill press vise or the brass vise on its XY stage - those are made to be fixed to the machine.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked, to the United States, Australia, New Zealand and Canada. \u003cstrong\u003eOne to two weeks.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"ARVONELLE","offers":[{"title":"Default Title","offer_id":50486219505855,"sku":"MB-VISE-ROTATE12","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S53c9a13309f645e1b1e99cd07aa31263C.webp?v=1789528599"},{"product_id":"fractal-vise-stainless","title":"Fractal Vise for Jewelry and Watchmaking, 4 Jaw Stainless Steel Bench Vise for Irregular Parts","description":"\u003cp\u003e\u003cstrong\u003eFree with this vise: a 6-piece anti-static tweezer set (US$14.99 in our shop).\u003c\/strong\u003e It ships separately with its own tracking number.\u003c\/p\u003e\n\u003cp\u003eSome parts have no flat sides. A watch case, a ring, a cast bracket, a piece of carved bone. Put one of those in an ordinary vise and you are clamping on two small points, so it either slips or you crush it trying to stop it slipping.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S4242f757e3314be6b717bc793e839d6a3.webp?v=1789551846\" alt=\"Fractal vise jaw blades taking the shape of a part\" width=\"800\" height=\"800\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA bench vise for hand work.\u003c\/strong\u003e It sits on your bench next to the drill press, and you work in it with your hands — engraving, filing, setting a stone, polishing a case.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Seb5ecb9f8967493e93f5bc59eb34aed5f.webp?v=1789551845\" alt=\"Fractal vise holding an irregular workpiece\" width=\"800\" height=\"800\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eFour jaws, not two, and that is the whole point\u003c\/h3\u003e\n\u003cp\u003eThis vise carries \u003cstrong\u003etwo kinds of jaw at once\u003c\/strong\u003e. One pair is flat, for square stock and anything with parallel sides. The other pair is fractal: a stack of stainless segments that slide independently, close in until each one meets the part, then lock as a set. The jaw becomes the negative shape of whatever you put in it, so the grip spreads over the whole contour instead of two contact points.\u003c\/p\u003e\n\u003cp\u003eWhat that means in practice is you stop swapping tools. Square work goes in the flat pair, a ring or a bezel goes in the fractal pair, and the vise stays on the bench either way.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Scb7ebc2f4d0d4ee8978c82fa88c2c184P.webp?v=1789551845\" alt=\"Fractal vise side view with anvil face\" width=\"800\" height=\"800\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eThere is a spirit level built into the body\u003c\/h3\u003e\n\u003cp\u003eA small bubble level sits in the casting between the jaws, so you can set the vise flat on a bench that is not, before you start filing or engraving. It is the detail that tells you who this was designed for.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S2d9317f9cd0d44269d4c003df41f3fbdE.webp?v=1789551845\" alt=\"Fractal vise base and mounting holes\" width=\"800\" height=\"800\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eThe numbers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpening 90 mm (3.54 in)\u003c\/strong\u003e on the outer setting, \u003cstrong\u003e45 mm (1.77 in)\u003c\/strong\u003e on the inner one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e160 mm (6.3 in) long overall.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eStainless steel body and jaws.\u003c\/li\u003e\n\u003cli\u003eNon-slip silicone base.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM6 holes drilled through the base\u003c\/strong\u003e so it can be bolted to a bench.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere it belongs in the shop\u003c\/h3\u003e\n\u003cp\u003eThink of the bench as two halves. On one half the machine drills holes, and everything that clamps to it — the drill press vise, the sliding stages, the base plate — lives there. On the other half you do the work that only hands can do, and this is what holds the part while you do it.\u003c\/p\u003e\n\u003cp\u003eA person who owns the drill press still needs somewhere to hold a ring while he cleans up the hole he just made.\u003c\/p\u003e\n\u003ch3\u003eStraight answers\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWill the jaws mark the part?\u003c\/strong\u003e The design spreads the pressure over the whole shape. On soft gold or a polished case, a strip of leather or tape between keeps it perfect.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I bolt it down?\u003c\/strong\u003e Yes, through the M6 holes. Or leave it on the silicone base, which is what most people do.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSo what holds work under the drill?\u003c\/strong\u003e The \u003ca href=\"\/products\/drill-press-vise\"\u003edrill press vise\u003c\/a\u003e. That one sits on the machine and holds the part square.\u003c\/p\u003e\n\u003ch3\u003eWhat is in the box\u003c\/h3\u003e\n\u003cp\u003eOne vise, plus the free 6-piece tweezer set in its own parcel.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked, to the United States, Australia, New Zealand and Canada alike. \u003cstrong\u003eTwo to three weeks.\u003c\/strong\u003e This one is heavy stainless and comes from a workshop, picked and posted after you place your order.\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"Yellow","offer_id":50491916517567,"sku":"MB-VISE-FRACTAL","price":179.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S815995c5547c46fa9fcf1ad1d00ea979s.webp?v=1789551845"},{"product_id":"engraving-ball-vise","title":"Engraving Ball Vise, 3 or 5 inch, Jewelers Block","description":"\u003cp\u003eYou are setting a stone, or cutting a letter into a signet ring, and the part keeps shifting under the graver. A ball vise fixes that. The jaws hold the work, the ball sits loose in its base, and you turn the whole thing to whatever angle the tool wants without ever letting go of the part.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S53d4992dd5db488099da8670033cd3b1Q.webp?v=1789566887\" alt=\"Ball vise tilted in the base to show the rotation\" width=\"1600\" height=\"1600\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHow it works\u003c\/h3\u003e\n\u003cp\u003eThe body is a ball of chrome-plated steel with a parallel-jaw vise built into the flat top. The ball drops into a molded base of reinforced plastic and turns a full 360 degrees, and because it is a ball it tilts as well. Loosen the jaws with the hex key, seat the part, tighten. Then you have both hands on the tool instead of one on the tool and one holding the job still.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S53d4992dd5db488099da8670033cd3b1Q_c04c5527-91e5-4d45-8be7-e8727865c7d1.webp?v=1789967015\" alt=\"The 3 inch ball vise in use, a ring held in the jaws while a graver cuts\" width=\"1600\" height=\"1600\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eWhich size\u003c\/h3\u003e\n\u003cp\u003eThe difference that matters is how wide the jaws open and how much the thing weighs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3 inch.\u003c\/strong\u003e Ball 78 mm. Jaws open to 54 mm, which is 2.13 inches. With every accessory in the box it weighs 4.4 lb, about 2 kg. On the bench it stands 97 by 97 by 85 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5 inch.\u003c\/strong\u003e Ball 127 mm. Jaws open to 98 mm, which is 3.86 inches. It weighs 20.3 lb, about 9.2 kg. On the bench it stands 145 by 145 by 170 mm.\u003c\/p\u003e\n\u003cp\u003eNine kilos is the whole point of the 5 inch. If you push a graver by hand the 3 inch is enough. If you tap the graver with a hammer, the mass is what stops the vise walking across the bench.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S984a9abbadd84b3c88ae1226c762815bg.webp?v=1789967015\" alt=\"Setting a stone with the ball held steady on its rubber ring\" width=\"1600\" height=\"1600\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat comes in the box\u003c\/h3\u003e\n\u003cp\u003eThe attachments are pins, stepped jaws and ring clamps that drop into the holes in the jaw face, so the vise grips a ring band, a flat plate or an awkward casting without marking it.\u003c\/p\u003e\n\u003cp\u003eThe 3 inch, 30 piece kit: 3 ring clamps, 2 large plate clamps, 4 medium plate clamps, 4 small plate clamps, 4 long rubber pins, 4 short rubber pins, 8 small oblate pins, and a hex key in a plastic box.\u003c\/p\u003e\n\u003cp\u003eThe 5 inch, 35 piece kit: 2 ring clamps, 2 large plate clamps, 4 medium, 4 small, 4 long rubber pins, 4 short rubber pins, 8 small oblate pins, 5 large oblate pins, and a hex key in a plastic box.\u003c\/p\u003e\n\u003cp\u003eThe 70 piece and 69 piece kits are the same vise with more of the same parts. For an itemized list of those two, write to us before you order.\u003c\/p\u003e\n\u003cp\u003eA hand-work fixture for engraving, stone setting and small repair.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eThis one ships from a warehouse in the United States: \u003cstrong\u003efive to nine days\u003c\/strong\u003e to a US address. \u003cstrong\u003eShips within the US only.\u003c\/strong\u003e Free and tracked.\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"3in 70PCs","offer_id":50488086659263,"sku":"MB-ENGRAVEVISE-3-70","price":149.0,"currency_code":"USD","in_stock":true},{"title":"3in 30PCs","offer_id":50488086823103,"sku":"MB-ENGRAVEVISE-3-30","price":129.0,"currency_code":"USD","in_stock":true},{"title":"5in 69PCs","offer_id":50488087019711,"sku":"MB-ENGRAVEVISE-5-69","price":189.0,"currency_code":"USD","in_stock":true},{"title":"5in 35PCs","offer_id":50488087216319,"sku":"MB-ENGRAVEVISE-5-35","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/ball-vise-kit-clean.jpg?v=1789959115"},{"product_id":"precision-toolmakers-vise","title":"Precision Toolmaker's Vise, 1 to 1.5 inch, Ground Steel","description":"\u003cp\u003eThis is the plain gray block you see bolted to a surface grinder in a machine shop. It is a toolmaker's vise: a ground steel body, two parallel jaws, one screw. Nothing swivels, nothing tilts, nothing is made of zinc.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Scdad8b9d36e042bfb0d269bf4be09677L.webp?v=1789570129\" alt=\"Ground steel body and parallel jaws\" width=\"850\" height=\"850\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat the cross groove is for\u003c\/h3\u003e\n\u003cp\u003eBoth jaw faces carry a V cut vertically and a groove cut horizontally. Put a round pin in the vertical V and it stands up square. Lay it in the horizontal groove and it lies down square. Without those cuts a round part just rolls out of flat jaws, or worse, it stays put until you cut it and then rolls.\u003c\/p\u003e\n\u003cp\u003eThe side of the body has a groove too, 6 mm wide and 4 mm deep, so the vise can be clamped down on its side and used on end.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S28dcea13b3ac400eb1ffeeb230a67071h.webp?v=1789570129\" alt=\"Cross V groove in the jaw faces\" width=\"850\" height=\"850\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eThe three sizes\u003c\/h3\u003e\n\u003cp\u003eThe number is the jaw width. 1 inch is 25 mm, 1.3 inch is 33 mm, 1.5 inch is 38 mm. All three are the same length, 60 mm, and the same jaw height, 14.5 mm. The body weighs about 450 g. Opening 23 mm.\u003c\/p\u003e\n\u003cp\u003ePick the width by the part, not by the price. If you are holding watch plates and pin stock, 1 inch is plenty and it takes up less bench. If you are holding a small casting or a piece of bar, go wider.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S9df230e763aa4adab35014448ac85f53h.webp?v=1789570129\" alt=\"Vise seen from the side with the clamping groove\" width=\"850\" height=\"850\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eUsing it for drilling\u003c\/h3\u003e\n\u003cp\u003eTo drill in it, clamp it to the table you are drilling on, so it stays square under the bit.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked, to the United States, Australia, New Zealand and Canada. \u003cstrong\u003eTwo to three weeks.\u003c\/strong\u003e This is ground steel from the workshop.\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"1 inch","offer_id":50485778940095,"sku":"MB-VISE-TOOLMAKER-1","price":79.99,"currency_code":"USD","in_stock":true},{"title":"1.3 inch","offer_id":50485778972863,"sku":"MB-VISE-TOOLMAKER-1.3","price":81.99,"currency_code":"USD","in_stock":true},{"title":"1.5 inch","offer_id":50485779005631,"sku":"MB-VISE-TOOLMAKER-1.5","price":85.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S92ea88f6429d477c83031195e466d727O.webp?v=1789570129"},{"product_id":"horned-bench-anvil-128-mm","title":"Horned Bench Anvil on Wooden Base, 128 mm","description":"\u003cp\u003eA proper little horned anvil, bolted to a wooden block. It sits on the bench like it belongs there, and it earns its place the first time a ring goes oval or a rivet needs closing.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S446eec842454412b8622de876cd236629.webp?v=1790396821\" alt=\"Close-up of the anvil horn with a brass wire being formed\" width=\"800\" height=\"800\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCast anvil, 128 mm end to end, with a ground flat face of about 75 × 26 mm and a square hardy hole\u003c\/li\u003e\n\u003cli\u003eA tapered horn for bringing rings, bezels and links back round\u003c\/li\u003e\n\u003cli\u003eWooden base, 119 × 54 × 21 mm, with the anvil fixed to it by four bolts\u003c\/li\u003e\n\u003cli\u003e84 mm tall overall, about 770 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S5b9c499fc2154d8b810262078ab79309w.webp?v=1790396821\" alt=\"Hammering a pin on the anvil face over the hardy hole\" width=\"800\" height=\"800\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWhat it's for\u003c\/h2\u003e\n\u003cp\u003eLight forming at the bench. Riveting watch straps, doming, straightening bent findings, rounding small rings, flattening sheet, tapping pins. A jeweler's or chasing hammer is the right partner for it.\u003c\/p\u003e\n\u003cp\u003eWhen it isn't working, it's the best-looking thing on the desk. A good gift for anyone who makes things with their hands.\u003c\/p\u003e\n\u003ch2\u003eDelivery\u003c\/h2\u003e\n\u003cp\u003eFree and tracked to the United States, Australia, New Zealand and Canada. \u003cstrong\u003eOne to two weeks.\u003c\/strong\u003e 30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"ARVONELLE","offers":[{"title":"Default Title","offer_id":50487741481151,"sku":"MB-HORNANVIL-128-BASE","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S8ebdaa598c284f6a8bc0d553ec648559v.webp?v=1790396821"},{"product_id":"mini-bench-vise-1-inch-swivel-base","title":"Mini Bench Vise, 1 inch Jaws, Swivel Base","description":"\u003cp\u003eA vise bolted flat to the bench holds the work in one position. Then the job needs the piece tilted thirty degrees toward you, and you end up holding it by hand with a file in the other one. This one pivots.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S1fca348b00ab4cfbbe7a35d73c8d8f34J.jpg_960x960q75.webp?v=1789685319\" alt=\"The vise held in a hand, showing the ball joint and locking lever\" width=\"850\" height=\"850\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eHow it moves\u003c\/h2\u003e\n\u003cp\u003eThe body sits on a ball joint over a round base. Loosen the brass-topped lever, tilt the jaws to any angle, swing them around, tighten. The knurled screw on the base locks the rotation separately, so you can set the angle once and still spin the work to reach the other side.\u003c\/p\u003e\n\u003cp\u003eThe base has holes through it. Bolt it down and it stays where you put it.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S9be45d1648e742b081c87b3285465a77A.jpg_960x960q75.webp?v=1789685319\" alt=\"Close view of the stepped jaws, the V-groove and the horn behind the fixed jaw\" width=\"850\" height=\"850\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eThe jaws\u003c\/h2\u003e\n\u003cp\u003eOne inch, stepped, with a V-groove cut across the front. Flat stock sits on the step, round stock drops into the V and does not roll while you drill or file it. Behind the fixed jaw there is a small horn for tapping and forming.\u003c\/p\u003e\n\u003cp\u003e304 stainless throughout.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S193e4e1903c44226900ebfde9524aa9fo.jpg_960x960q75.webp?v=1789685319\" alt=\"Underside of the round base with its mounting holes\" width=\"850\" height=\"850\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eMade for small work\u003c\/h2\u003e\n\u003cp\u003eWatch parts, findings, model work, anything you would bring to a mini drill press. Keep the cuts light and the file sharp - a tilting ball joint is made for positioning, not for heavy cuts.\u003c\/p\u003e\n\u003ch2\u003eDelivery\u003c\/h2\u003e\n\u003cp\u003eFree and tracked, to the United States, Australia, New Zealand and Canada. \u003cstrong\u003eTwo to three weeks.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"ARVONELLE","offers":[{"title":"Default Title","offer_id":50486178545855,"sku":"MB-VISE-MINI1","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S195cfa8793f049078d7e460a3dbd2bafH.jpg_960x960q75.webp?v=1789685319"},{"product_id":"rotating-bench-vise-clamp-on","title":"Mini Table Vise with Suction Base, Rotating","description":"\u003cp\u003eA small screw vise that stands on a suction base. Press the lever down and it holds to the bench; flip it up and it lifts off. No clamp, no screws in the furniture, nothing to set up.\u003c\/p\u003e\n\u003ch3\u003eHow it works\u003c\/h3\u003e\n\u003cp\u003eThe base locks onto any smooth, flat surface - a glass top, a laminate desk, a sealed workbench, a tile. The head turns on the column so the work faces you instead of the wall, and tilts on its hinge when you need a different angle.\u003c\/p\u003e\n\u003cp\u003eThe jaws carry four soft yellow posts instead of bare metal. They grip round and odd-shaped work - a ring, a bead, a pendant, a small casting - without marking it. The jaws open to about 30 mm.\u003c\/p\u003e\n\u003ch3\u003eWhat it is for\u003c\/h3\u003e\n\u003cp\u003eHolding while you file, solder, glue, sand, polish or inspect. Jewelry, models, small electronics, watch parts. Set it next to the drill press where your hands already are, and put it away in a drawer when you are done.\u003c\/p\u003e\n\u003cp\u003eThe suction base needs a smooth surface. On raw wood or a textured top, use a piece of glass or a tile under it.\u003c\/p\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cp\u003eThe vise with suction base and the hex key for the jaw posts.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked, to the United States, Australia, New Zealand and Canada. \u003cstrong\u003eOne to two weeks.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"ARVONELLE","offers":[{"title":"Default Title","offer_id":50486227566783,"sku":"MB-VISE-ROTCLAMP","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sd3eb910f3f2f4456be00e1ce9f0abd8cb.webp?v=1789871426"},{"product_id":"magnetic-soft-jaws","title":"Magnetic Soft Jaws for Bench Vise, Pair","description":"\u003cp\u003eSteel vise jaws are hardened and cut with teeth, because they are designed to not let go. That is exactly what ruins a finished part - you tighten, the teeth bite, and now there are two rows of dents in a surface you spent an hour on.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S1b5e50dfdc464f7e9c8c826eac81810cU.webp?v=1789923187\" alt=\"Magnetic rubber soft jaws, pair\" width=\"1001\" height=\"1001\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eRubber-faced pads on an aluminum backing, held on by magnets. They go on in a second and come off in a second.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Aea1e5f9b20eb4639b1a2f365f4313d21Y.webp?v=1789923187\" alt=\"Soft jaws fitted to a bench vise\" width=\"500\" height=\"375\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eTwo faces, two jobs\u003c\/h3\u003e\n\u003cp\u003eFlat is for flat stock - sheet, bar, a finished face you do not want marked.\u003c\/p\u003e\n\u003cp\u003eV-groove is for anything round. A round part in flat jaws touches on two lines and rolls under load. The V holds it on four, so it sits on the axis and stays there. If you are drilling across a rod, this is the difference between a hole through the center and a hole that wanders off the side.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/A1dd4efc9dc7544a587c50b3687a84702x.webp?v=1789923187\" alt=\"The jaws in use holding work\" width=\"1500\" height=\"2000\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eUsing them well\u003c\/h3\u003e\n\u003cp\u003eTighten firmly, not hard - soft jaws grip by friction, so a crushed part is as easy as a dented one. Seat the pads flat before you tighten. Keep heat and acetone off the rubber.\u003c\/p\u003e\n\u003cp\u003eMeasure your vise jaw width before ordering. These are sold by that width, not by the vise's nominal size.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked, to the United States, Australia, New Zealand and Canada alike. \u003cstrong\u003eOne to two weeks.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"6 inch, flat","offer_id":50486309290175,"sku":"MB-SOFTJAW-6-FLAT","price":24.99,"currency_code":"USD","in_stock":true},{"title":"4 inch, V-groove","offer_id":50486309388479,"sku":"MB-SOFTJAW-4-VGROOVE","price":19.99,"currency_code":"USD","in_stock":true},{"title":"5 inch, V-groove","offer_id":50486309421247,"sku":"MB-SOFTJAW-5-VGROOVE","price":23.99,"currency_code":"USD","in_stock":true},{"title":"4 inch, flat","offer_id":50486309454015,"sku":"MB-SOFTJAW-4-FLAT","price":19.99,"currency_code":"USD","in_stock":true},{"title":"5 inch, flat","offer_id":50486309486783,"sku":"MB-SOFTJAW-5-FLAT","price":19.99,"currency_code":"USD","in_stock":true},{"title":"6 inch, V-groove","offer_id":50486309519551,"sku":"MB-SOFTJAW-6-VGROOVE","price":25.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S1b5e50dfdc464f7e9c8c826eac81810cU_445cecd5-fd75-42f9-b154-16259bdfb2a1.webp?v=1791216278"},{"product_id":"brass-watch-vise-with-graduated-staff-plate","title":"Brass Watch Vise with Graduated Staff Plate","description":"\u003cp\u003eA watch staff is a fraction of a millimeter across. Hold it in an ordinary vise and you either crush it or it rolls out. This is the tool that does neither.\u003c\/p\u003e\n\u003cp\u003eSolid brass body, a knurled brass screw, and a hardened steel insert let into the jaw with a row of 11 holes in graduated sizes, 0.2 to 1.2 mm. The staff drops into the hole that fits it, the insert carries the load, and the jaws hold everything square while you work.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S9a5cb12dbe9748489346e68ed44e6ae2W.webp?v=1789952621\" alt=\"Side view of the brass vise showing the knurled screw\" width=\"1000\" height=\"1000\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYou get one vise with the 11-hole plate.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eSize\u003c\/h3\u003e\n\u003cp\u003e70 mm overall, 24 mm across the base.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/brass-watch-vise-11-hole-dimensions.webp?v=1791091162\" alt=\"Brass watch vise dimensions: 70 mm long, 24 mm wide, 11-hole plate\" width=\"500\" height=\"1000\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eBrass is soft. That is the point — it marks before your work does — so this is a holding vise, not something to hammer against. For that, an anvil.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked, to the United States, Australia, New Zealand and Canada alike. \u003cstrong\u003eThree to four weeks.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"Default Title","offer_id":47515209171135,"sku":null,"price":65.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S989cba5be81d4027a6ea23704ee54d7bf.webp?v=1789952621"},{"product_id":"vise-mounting-plate-40-x-40-mm","title":"Vise Mounting Plate 40 x 40 mm, Aluminum","description":"\u003cp\u003eA small vise and a sliding stage are made by different people who never spoke to each other. The vise has its own bolt pattern, the stage has another, and neither lines up. This is the piece that makes them agree.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S415187b6bb2f4a678d6f0cc2472514b5L.webp?v=1789952221\" alt=\"The plate from above with its four fixing screws\" width=\"1000\" height=\"1000\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eAluminum, 40 x 40 mm, 4.5 mm thick. Four countersunk holes at the corners go down to the stage. A cluster of tapped holes in the middle takes the vise. Between them you get a joint that does not shift when you lean on it.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S6bf482f7f05a448e94786c8b11de1a14K.webp?v=1789952220\" alt=\"The plate measured at 4 cm on each side\" width=\"1000\" height=\"1000\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne plate, 40 x 40 x 4.5 mm\u003c\/li\u003e\n\u003cli\u003eFour fixing screws\u003c\/li\u003e\n\u003cli\u003eA hex driver\u003c\/li\u003e\n\u003cli\u003eOne screw for joining the vise to a swivel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S7e4962c0a34d4c2a8003b74af5fe546eJ.webp?v=1789952221\" alt=\"The plate seen at an angle, showing its thickness\" width=\"1000\" height=\"1000\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe vise and sliding stage in the photographs show what the plate is for and are not included.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sa1b52730c3834e35b9c7bed451a60a00h.webp?v=1789952221\" alt=\"The plate fitted on top of a sliding stage, stage not included\" width=\"1000\" height=\"1000\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eMade for a 40 mm stage; on a 60 mm stage it will not reach the corner holes.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked, to the United States, Australia, New Zealand and Canada alike. \u003cstrong\u003eOne to two weeks.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"Default Title","offer_id":50486414508223,"sku":"MB-VISEPLATE-40","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S0fce25b619f44e32b674aa0b5a0fb25dq.webp?v=1789952220"},{"product_id":"vise-clamp-plate-60-mm-with-brass-hold-downs","title":"Vise Clamp Plate 60 mm with Brass Hold-Downs","description":"\u003cp\u003eHolds a small vise or a flanged fixture down on a 60 mm stage or base without drilling anything. Two brass hold-downs press on the vise's flange. Loosen two screws, slide the vise to where you want it, tighten, and it's locked.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMachined aluminum plate, 60 x 60 mm, with corner holes for fixing it down\u003c\/li\u003e\n\u003cli\u003eTwo brass hold-down bars with their screws\u003c\/li\u003e\n\u003cli\u003eBrass grips firmly without marking the vise\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe vise in the photos is shown for scale and sold separately.\u003c\/p\u003e\u003ch3\u003eDelivery\u003c\/h3\u003e\u003cp\u003eFree and tracked to the United States, Australia, New Zealand and Canada. \u003cstrong\u003eOne to two weeks.\u003c\/strong\u003e 30-day returns from the day it arrives.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"Default Title","offer_id":67503192506559,"sku":"MB-VISECLAMP-60","price":57.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/57561884-5ED9-41CD-B24A-F5824C9B4DF3.png?v=1790880954"},{"product_id":"aluminium-mini-vise-with-v-groove-jaws-34-39-or-59-mm","title":"Aluminum Mini Vise with V-Groove Jaws","description":"\u003cp\u003e\u003cstrong\u003eA small, light, square-sided vise that bolts down flat: onto a stage, a base plate, or the bench.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sb22cae6033784534980197176cd24b47X.webp?v=1790790950\" alt=\"34 mm jaw vise with dimensions\" width=\"950\" height=\"950\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eMachined aluminum body, a steel lead screw with a knurled knob, and jaws with a \u003cstrong\u003eV-groove cut across them\u003c\/strong\u003e, so a pin, a drill blank or a round shaft sits centered instead of rolling. Flat parts sit on the jaw faces as usual. Counterbored holes in the body take the screws that hold it down, and it comes with its own M5 screws and T-nuts.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S4419fe87dfe449e89a816a5d82b75c7c0.webp?v=1790790950\" alt=\"39 mm jaw vise with dimensions\" width=\"950\" height=\"950\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eThree sizes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e34 mm jaws\u003c\/strong\u003e (teal): opens to 39 mm, body 90 mm long, 25 mm tall. The one for a 40 or 60 mm stage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e39 mm jaws\u003c\/strong\u003e (red): opens to 50 mm, body 100 mm long, 29 mm tall.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e59 mm jaws\u003c\/strong\u003e (red): opens to 100 mm, body 180 mm long, about 650 g. For a base plate or the bench.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Se43150ccd90243259d6960c55dce673dZ.webp?v=1790790950\" alt=\"59 mm jaw vise with dimensions\" width=\"950\" height=\"950\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eWhere it fits in\u003c\/h3\u003e\n\u003cp\u003eThis is the top layer of a small setup: machine, then a stage for position, then this to hold the part square under the bit.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked, to the United States, Australia, New Zealand and Canada alike. \u003cstrong\u003eOne to two weeks.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"34 mm jaws","offer_id":67531311841471,"sku":"MB-VISE-ALU-34","price":39.0,"currency_code":"USD","in_stock":true},{"title":"39 mm jaws","offer_id":67531311874239,"sku":"MB-VISE-ALU-39","price":44.0,"currency_code":"USD","in_stock":true},{"title":"59 mm jaws","offer_id":67531311907007,"sku":"MB-VISE-ALU-59","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S14829a9c0695447990efb608838ca3572.webp?v=1790790950"},{"product_id":"precision-grinding-vise-2-inch-qgg50","title":"Precision Grinding Vise 2 or 2.5 inch QGG, Toolmaker Vise for Drill Press and Milling","description":"\u003cp\u003e\u003cstrong\u003eA solid block of hardened, ground steel that holds a part dead square. Set it on any of its sides and the part is still square.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/FullSizeRender_04efb2b5-cf13-44a9-bd5f-71eef2a5c5f8.jpg?v=1791086331\" alt=\"QGG50 toolmaker vise with knurled screw knob\" width=\"1301\" height=\"1178\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the vise you find on a surface grinder or in a toolroom. The body and jaws are ground flat and square, so the vise can lie flat, stand on end or sit on its side and the work stays true. One screw with a knurled knob closes the jaw; there is nothing to swivel and nothing to wobble.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/FullSizeRender_b489abc6-29ac-4174-8724-cef27f1d69d9.jpg?v=1791086346\" alt=\"Precision vise standing on end, square on every side\" width=\"1320\" height=\"1556\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eTwo sizes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 inch (QGG50):\u003c\/strong\u003e jaw width 50 mm, jaw height 25 mm, opens to about 68 mm. Handy size for a bench drill or mini mill.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5 inch (QGG63):\u003c\/strong\u003e jaw width 63 mm, opens to 85 mm, 190 mm long, about 3.8 kg. More grip and more mass for bigger parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/FullSizeRender_4666cc2f-5073-4d8e-83c8-81d54531dd8c.jpg?v=1791086362\" alt=\"Precision grinding vise top view, screw and movable jaw\" width=\"1320\" height=\"1571\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquare and parallel to 0.005 mm.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardened steel, HRC 45 and up,\u003c\/strong\u003e ground on all sides.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eV-grooves in the jaw\u003c\/strong\u003e hold round stock upright or lying down, and the side slots let you clamp the vise to a table.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/FullSizeRender_1c741ffc-3433-42a4-90f8-c705e9ec2fca.jpg?v=1791086378\" alt=\"Precision grinding vise side view with clamping slot\" width=\"1298\" height=\"1566\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eGood for\u003c\/h3\u003e\n\u003cp\u003eDrilling and light milling on a bench drill or mini mill, surface grinding, setting up parts for measurement, and holding small parts square for filing and layout.\u003c\/p\u003e\n\u003cp\u003eNeed something smaller for watch and model parts? See the \u003ca href=\"\/products\/precision-toolmakers-vise\"\u003e1 to 1.5 inch toolmaker's vise\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked within the United States. \u003cstrong\u003eOne to two weeks.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"ARVONELLE","offers":[{"title":"2 inch","offer_id":67543055925439,"sku":"MB-VISE-QGG50","price":99.0,"currency_code":"USD","in_stock":true},{"title":"2.5 inch","offer_id":67543057039551,"sku":"MB-VISE-QGG63","price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/FullSizeRender_2c768023-92b6-4998-88e3-49c686c5c184.jpg?v=1791086319"},{"product_id":"screwless-toolmaker-vise-precision-ground","title":"Screwless Toolmaker Vise 1, 2 or 3 inch, Precision Machinist Vise for Drill Press","description":"\u003cp\u003e\u003cstrong\u003eA ground steel block with a jaw that pulls down as it closes. The part sits flat and square, and the vise works lying down, on its side or standing on end.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/s-l1600_bb8333d6-b864-4fa7-a242-850282a8e0d8.jpg?v=1791134183\" alt=\"1 inch screwless vise front view\" width=\"1600\" height=\"1600\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThere is no screw sticking out of the end. The moving jaw slides in a slot and is locked by an Allen key, so the whole vise is a clean rectangular block you can set on a drill press table, a surface grinder or an XY stage. All six faces are ground square to each other.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/s-l1600_3a02a639-3a6a-4b69-8c6a-ead91d329540.jpg?v=1791134182\" alt=\"1 inch screwless vise side view\" width=\"1600\" height=\"1600\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eThree sizes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 inch:\u003c\/strong\u003e jaw width 1\", opens to 13\/16\" (about 20 mm), 2-1\/2\" long, 1-1\/8\" high, about 8 oz. Small enough to sit on a 60 mm micrometer stage. Square and parallel to 0.0002\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 inch:\u003c\/strong\u003e jaw width 2\", opens to 2\", 5-1\/2\" long, jaw depth 1.1\", about 5 lb. Parallel to 0.003 mm per 100 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 inch:\u003c\/strong\u003e jaw width 3\", opens to 3-3\/4\", 7\" long, jaw depth 1-3\/8\". Square and parallel to 0.0002\".\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/s-l1600.jpg?v=1791134182\" alt=\"1 inch screwless vise angled view\" width=\"1600\" height=\"1600\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardened alloy steel,\u003c\/strong\u003e ground on every face.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRow of holes along the body\u003c\/strong\u003e to move the fixed stop and take longer parts.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAllen key included.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/s-l1600_5ca34f0d-515d-4108-8122-0a107cca6e48.jpg?v=1791134183\" alt=\"Screwless vise standing on end\" width=\"1600\" height=\"1600\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eGood for\u003c\/h3\u003e\n\u003cp\u003eDrilling small parts dead square on a bench or mini drill press, light milling, surface grinding, and holding parts for layout and measuring.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eUnited States only. Free and tracked, ships from New Jersey, \u003cstrong\u003eusually 4 to 8 business days.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"ARVONELLE","offers":[{"title":"1 inch","offer_id":67545566150847,"sku":"MB-VISE-SCREWLESS-1","price":79.0,"currency_code":"USD","in_stock":true},{"title":"2 inch","offer_id":67545566183615,"sku":"MB-VISE-SCREWLESS-2","price":89.0,"currency_code":"USD","in_stock":true},{"title":"3 inch","offer_id":67545566216383,"sku":"MB-VISE-SCREWLESS-3","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/s-l1600_97897edb-7df7-4aef-ba16-52d882c21eab.jpg?v=1791134182"},{"product_id":"precision-grinding-vise-2-inch-qgg50-australia-new-zealand","title":"Precision Grinding Vise 2 inch QGG50, Toolmaker Machine Vise — Australia \u0026 New Zealand","description":"\u003cp\u003e\u003cstrong\u003eA solid block of hardened, ground steel that holds a part dead square. Set it on any of its sides and the part is still square.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/FullSizeRender_04efb2b5-cf13-44a9-bd5f-71eef2a5c5f8.jpg?v=1791086331\" alt=\"QGG50 toolmaker vise with knurled screw knob\" width=\"1301\" height=\"1178\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the vise you find on a surface grinder or in a toolroom. The body and jaws are ground flat and square, so the vise can lie flat, stand on end or sit on its side and the work stays true. One screw with a knurled knob closes the jaw; there is nothing to swivel and nothing to wobble.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/FullSizeRender_b489abc6-29ac-4174-8724-cef27f1d69d9.jpg?v=1791086346\" alt=\"Precision vise standing on end, square on every side\" width=\"1320\" height=\"1556\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 inch (QGG50):\u003c\/strong\u003e jaw width 50 mm, opens to about 68 mm. Handy size for a bench drill or mini mill.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSquare and parallel to 0.005 mm.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardened steel, HRC 48 to 52,\u003c\/strong\u003e ground on all sides.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eV-grooves in the jaw\u003c\/strong\u003e hold round stock upright or lying down, and the side slots let you clamp the vise to a table.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/FullSizeRender_4666cc2f-5073-4d8e-83c8-81d54531dd8c.jpg?v=1791086362\" alt=\"Precision grinding vise top view, screw and movable jaw\" width=\"1320\" height=\"1571\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eGood for\u003c\/h3\u003e\n\u003cp\u003eDrilling and light milling on a bench drill or mini mill, surface grinding, setting up parts for measurement, and holding small parts square for filing and layout.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eThis listing is for \u003cstrong\u003eAustralia and New Zealand\u003c\/strong\u003e. Free and tracked, \u003cstrong\u003etwo to three weeks.\u003c\/strong\u003e In the United States, order the \u003ca href=\"\/products\/precision-grinding-vise-2-inch-qgg50\"\u003eUS listing\u003c\/a\u003e, which ships within the country.\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"ARVONELLE","offers":[{"title":"Default Title","offer_id":67545733038271,"sku":"14:200025551#A Type;200007763:201336100","price":99.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/FullSizeRender_2c768023-92b6-4998-88e3-49c686c5c184.jpg?v=1791086319"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/collections\/S815995c5547c46fa9fcf1ad1d00ea979s.webp?v=1789744851","url":"https:\/\/arvonelle.com\/collections\/vises.oembed","provider":"ARVONELLE","version":"1.0","type":"link"}