{"title":"Drills, bits and abrasives","description":"\u003cp\u003eEverything that cuts, grinds or smooths. These are consumables. They blunt, they snap, and you buy them again - so we keep the small sizes in stock rather than the pretty boxed sets.\u003c\/p\u003e","products":[{"product_id":"micro-drill-bits-20","title":"PCB Micro Drill Bits, 3.175 mm Shank, 10 of One Size","description":"\u003cp\u003e\u003cstrong\u003eTen bits of the size you actually keep breaking.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery assortment set has the same problem: you snap two 0.8 mm bits on a Saturday and the box still has nine sizes you will never touch. So we sell them the other way round - one size, ten bits, and you buy the size you use.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Se42695ff1593472ea6b19712de52e9ebY.webp?v=1789511615\" alt=\"PCB drill bits with coloured size collars\" width=\"960\" height=\"960\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTungsten carbide, 3.175 mm (1\/8 inch) shank.\u003c\/strong\u003e That shank drops straight into the drill press chuck and into every rotary tool.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e38 mm long, 10 mm flute.\u003c\/strong\u003e Standard PCB bit geometry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColored collar per size\u003c\/strong\u003e so you can grab the right one without a caliper. The collar color marks the size.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sced28f4e18f84c499c195f8e6a756773i.webp?v=1789511615\" alt=\"PCB drill bit tip, close up\" width=\"960\" height=\"960\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eStock up: three packs for $29.99\u003c\/h3\u003e\n\u003cp\u003eThe fine sizes are consumables, and most people come back for the same size within a month. Pick \u003cstrong\u003e3 packs (30 bits)\u003c\/strong\u003e and you get thirty bits of your size for $29.99 instead of $38.97 - one parcel, one wait.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S2a66a12da2094e8c8ffc092abc4b87433.webp?v=1789511614\" alt=\"PCB drill bits in their storage case\" width=\"960\" height=\"960\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eWhich size do you want\u003c\/h3\u003e\n\u003cp\u003eTen single sizes, every tenth of a millimeter from \u003cstrong\u003e0.1 to 1.0 mm\u003c\/strong\u003e, ten bits in a pack.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0.1 to 0.4 mm\u003c\/strong\u003e - watch screws, the finest vias, pilot holes in a movement plate. These are the most delicate sizes, so run them slow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0.5 to 0.8 mm\u003c\/strong\u003e - the working range for circuit boards. If you are buying one pack and you are not sure, buy 0.8.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0.9 to 1.0 mm\u003c\/strong\u003e - component legs, terminal pins, small brass.\u003c\/p\u003e\n\u003cp\u003eIf you do not know yet, there are seven mixed packs instead: 0.1 to 1.0, 0.3 to 1.2, 0.5 to 1.4, 0.6 to 1.5, 1.1 to 2.0, 1.6 to 2.5, and 2.1 to 3.0 mm - plus a starter kit of three mixed packs (30 bits, 0.1 to 2.5 mm) for $39.99. The last two ranges go past what most boards need and into small brass and plastic.\u003c\/p\u003e\n\u003cp\u003eEvery size here fits the drill press chuck, which closes at 4 mm. On a machine running on about 24 watts, feed the 3 mm carbide bits with a light hand.\u003c\/p\u003e\n\u003ch3\u003eNeed a size that is not in the list\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWrite to us and we will try to get it.\u003c\/strong\u003e These bits are made in hundredths of a millimeter - 0.72, 0.87, 1.15 and so on - and we list the round sizes because that is what most people need.\u003c\/p\u003e\n\u003cp\u003eTell us the diameter you need at \u003ca href=\"mailto:support@arvonelle.com\"\u003esupport@arvonelle.com\u003c\/a\u003e. We will tell you what it costs and how long it takes before you pay anything.\u003c\/p\u003e\n\u003ch3\u003eGetting the most from carbide\u003c\/h3\u003e\n\u003cp\u003eCarbide is hard and brittle. A 0.5 mm bit breaks from speed and from sideways load, not from pressure - so run it slow, let it clear, and do not lever the part. That is why there are ten in a pack.\u003c\/p\u003e\n\u003ch3\u003eArrived broken? We replace it\u003c\/h3\u003e\n\u003cp\u003eOpen the pack and count them. If any arrived snapped, tell us the size and we send a replacement pack. Nothing to return and no photograph of a shipping label required.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked, to the United States, Australia, New Zealand and Canada. \u003cstrong\u003eOne to two weeks.\u003c\/strong\u003e Small items like these ship on their own, so they usually arrive before the machine does.\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"PCB 0.1mm 10pcs \/ 1 pack (10 bits)","offer_id":50485611692223,"sku":"MB-BIT-01","price":12.99,"currency_code":"USD","in_stock":true},{"title":"PCB 0.3mm 10pcs \/ 1 pack (10 bits)","offer_id":50485611757759,"sku":"MB-BIT-03","price":12.99,"currency_code":"USD","in_stock":true},{"title":"PCB 0.2mm 10pcs \/ 1 pack (10 bits)","offer_id":50485611790527,"sku":"MB-BIT-02","price":12.99,"currency_code":"USD","in_stock":true},{"title":"PCB 0.9mm 10pcs \/ 1 pack (10 bits)","offer_id":50485612052671,"sku":"MB-BIT-09","price":12.99,"currency_code":"USD","in_stock":true},{"title":"PCB 0.8mm 10pcs \/ 1 pack (10 bits)","offer_id":50485612085439,"sku":"MB-BIT-08","price":12.99,"currency_code":"USD","in_stock":true},{"title":"PCB 1.0mm 10pcs \/ 1 pack (10 bits)","offer_id":50485612150975,"sku":"MB-BIT-10","price":12.99,"currency_code":"USD","in_stock":true},{"title":"PCB 0.5mm 10pcs \/ 1 pack (10 bits)","offer_id":50485612183743,"sku":"MB-BIT-05","price":12.99,"currency_code":"USD","in_stock":true},{"title":"PCB 0.4mm 10pcs \/ 1 pack (10 bits)","offer_id":50485612216511,"sku":"MB-BIT-04","price":12.99,"currency_code":"USD","in_stock":true},{"title":"PCB 0.7mm 10pcs \/ 1 pack (10 bits)","offer_id":50485612249279,"sku":"MB-BIT-07","price":12.99,"currency_code":"USD","in_stock":true},{"title":"PCB 0.6mm 10pcs \/ 1 pack (10 bits)","offer_id":50485612282047,"sku":"MB-BIT-06","price":12.99,"currency_code":"USD","in_stock":true},{"title":"PCB 0.1mm 10pcs \/ 3 packs (30 bits), best value","offer_id":67658625843391,"sku":"MB-BIT-01-3P","price":29.99,"currency_code":"USD","in_stock":true},{"title":"PCB 0.2mm 10pcs \/ 3 packs (30 bits), best value","offer_id":67658625876159,"sku":"MB-BIT-02-3P","price":29.99,"currency_code":"USD","in_stock":true},{"title":"PCB 0.3mm 10pcs \/ 3 packs (30 bits), best value","offer_id":67658625908927,"sku":"MB-BIT-03-3P","price":29.99,"currency_code":"USD","in_stock":true},{"title":"PCB 0.4mm 10pcs \/ 3 packs (30 bits), best value","offer_id":67658625941695,"sku":"MB-BIT-04-3P","price":29.99,"currency_code":"USD","in_stock":true},{"title":"PCB 0.5mm 10pcs \/ 3 packs (30 bits), best value","offer_id":67658625974463,"sku":"MB-BIT-05-3P","price":29.99,"currency_code":"USD","in_stock":true},{"title":"PCB 0.6mm 10pcs \/ 3 packs (30 bits), best value","offer_id":67658626007231,"sku":"MB-BIT-06-3P","price":29.99,"currency_code":"USD","in_stock":true},{"title":"PCB 0.7mm 10pcs \/ 3 packs (30 bits), best value","offer_id":67658626039999,"sku":"MB-BIT-07-3P","price":29.99,"currency_code":"USD","in_stock":true},{"title":"PCB 0.8mm 10pcs \/ 3 packs (30 bits), best value","offer_id":67658626072767,"sku":"MB-BIT-08-3P","price":29.99,"currency_code":"USD","in_stock":true},{"title":"PCB 0.9mm 10pcs \/ 3 packs (30 bits), best value","offer_id":67658626105535,"sku":"MB-BIT-09-3P","price":29.99,"currency_code":"USD","in_stock":true},{"title":"PCB 1.0mm 10pcs \/ 3 packs (30 bits), best value","offer_id":67658626138303,"sku":"MB-BIT-10-3P","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/pcb-bits-one-size.jpg?v=1789933759"},{"product_id":"cobalt-drill-set-03-3","title":"Cobalt Drill Bit Set, 0.5 to 3 mm, 10 Pieces","description":"\u003cp\u003e\u003cstrong\u003eTen cobalt bits that stop exactly where the machine stops.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis set is 0.5 to 3 mm because that is the working range of the press you are putting them in. The chuck closes at 4 mm and the supply in the box gives about 24 watts, so every bit in the pack is one the machine will actually turn.\u003c\/p\u003e\u003ch3\u003eWhat is in the pack\u003c\/h3\u003e\u003cp\u003eTen bits in five sizes, two of each: \u003cstrong\u003e0.5, 1, 2, 2.5 and 3 mm.\u003c\/strong\u003e A spare of each is the useful thing at this scale - fine bits break, and the one you break is always the one you needed.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-speed steel with 5 percent cobalt (M35).\u003c\/strong\u003e Cobalt is what you use when plain HSS goes blunt on the second hole - harder metals, stainless, anything that work-hardens.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight shank.\u003c\/strong\u003e Fits the 0.3 to 4 mm chuck directly, no adapter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e135 degree split point\u003c\/strong\u003e so they start where you put them instead of wandering.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhich of our machines\u003c\/h3\u003e\u003cp\u003eThese go in the \u003cstrong\u003eMikrabench Mini Drill Press\u003c\/strong\u003e, the one with the 0.3 to 4 mm chuck. Fits chucks only: the Collet and Micrometer presses hold 3.175 mm shanks, so for those two machines, use the carbide PCB bits.\u003c\/p\u003e\u003ch3\u003eCobalt or carbide\u003c\/h3\u003e\u003cp\u003eDifferent jobs. The carbide micro bits are for circuit board holes and for sizes below 0.5 mm - very fine, very brittle, very fast. These are for metal: slower, tougher, and they bend before they snap.\u003c\/p\u003e\u003cp\u003eIf you are drilling boards, choose the carbide. If you are drilling brass, aluminum, steel sheet or a watch plate, choose these. In metal on this press, the sizes up to about 2 mm cut best; cobalt buys you edge life, not torque.\u003c\/p\u003e\u003ch3\u003eNeed one particular diameter\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWrite to us and we will try to get it.\u003c\/strong\u003e Both cobalt and carbide bits are made in hundredths of a millimeter; we stock the round sizes because that is what most people need.\u003c\/p\u003e\u003cp\u003eTell us the diameter at \u003ca href=\"mailto:support@arvonelle.com\"\u003esupport@arvonelle.com\u003c\/a\u003e and we will tell you what it costs and how long it takes before you pay anything.\u003c\/p\u003e\u003ch3\u003eDelivery\u003c\/h3\u003e\u003cp\u003eFree and tracked, to the United States, Australia, New Zealand and Canada. \u003cstrong\u003eOne to two weeks.\u003c\/strong\u003e Small items like these ship on their own and usually arrive before the machine does.\u003c\/p\u003e\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"Default Title","offer_id":50480058466495,"sku":"MB-COBALT-10","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sd4041dd0bf57483a9dd3a6ab84fccc25m.webp?v=1789521692"},{"product_id":"diamond-tipped-drill-bits-10-of-one-size","title":"Diamond Drill Bits for Glass, Sea Glass, Stone and Shell, 10 of One Size, 2.35 mm Shank","description":"\u003cp\u003eFor the materials a twist drill cannot touch. Glass, stone, sea shell, mother of pearl, ceramic, tile, bone, and the hard beads used in jewelry. A normal steel bit skates on those and then cracks them. These do not cut at all — the tip is coated in diamond grit and it grinds its way through.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S8196ec217f894ff18fc07adf3bda43b9f.webp?v=1789641727\" alt=\"Diamond-tipped bits with 2.35 mm shanks\" width=\"1088\" height=\"1088\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHow to use them\u003c\/h3\u003e\n\u003cp\u003eThree things decide whether the hole comes out clean or the piece cracks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWater.\u003c\/strong\u003e Keep the tip wet. A shallow puddle on the work, or a drop added every few seconds. A dry diamond bit overheats, the grit comes off the tip, and the bit is finished in under a minute.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLight pressure.\u003c\/strong\u003e You are grinding, not drilling. Let the weight of the quill do the work. Pushing harder does not speed it up, it chips the underside.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModerate speed.\u003c\/strong\u003e On this press the middle of the range is right. Faster is not better with diamond — heat is what kills both the bit and the workpiece.\u003c\/p\u003e\n\u003cp\u003eFor metal, use the cobalt set or the PCB bits; for wood, a twist drill.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sdbd4b5023108440f96f3016fd9f1ba73u.webp?v=1789641728\" alt=\"Size chart of the available diameters\" width=\"800\" height=\"800\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat fits what\u003c\/h3\u003e\n\u003cp\u003eThe shank is \u003cstrong\u003e2.35 mm\u003c\/strong\u003e, the standard rotary-tool size. It goes straight into the 0.3 to 4 mm chuck on the Mikrabench Mini Drill Press, and into any rotary tool that takes a 2.35 mm collet.\u003c\/p\u003e\n\u003cp\u003eFor the Collet and Micrometer presses, which hold 3.175 mm shanks only, choose bits with a 3.175 mm shank.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sdc5605937154417faf8fda0194ebc3d6u.webp?v=1789641727\" alt=\"Drilling a bead with a diamond bit\" width=\"1100\" height=\"1100\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eWhich size\u003c\/h3\u003e\n\u003cp\u003eSeven diameters, 0.8 mm up to 2.5 mm, and every pack is ten bits of that one size — not ten different sizes. You break the size you are using, not the ones you are not, and how long a pack lasts depends on how wet you keep them.\u003c\/p\u003e\n\u003cp\u003eIf you are drilling pearls and shell, the work sits between 0.8 and 1.2 mm. Stone cabochons and tile want 1.5 mm and up. At 0.8 mm the bit is thinner than a pin, so clamp the work.\u003c\/p\u003e\n\u003ch3\u003eMore sizes on request\u003c\/h3\u003e\n\u003cp\u003e0.4, 0.5 and 0.6 mm at the fine end, 1.1 mm in the middle, and 3 mm at the top are listed as sold out, and intermediates such as 0.7 and 1.4 mm are made too. \u003ca href=\"mailto:support@arvonelle.com\"\u003eWrite to us\u003c\/a\u003e for any of them and we will get one in, about a week.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked, to the United States, Australia, New Zealand and Canada. \u003cstrong\u003eOne to two weeks.\u003c\/strong\u003e These travel in their own parcel and usually arrive before the machine does.\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"ARVONELLE","offers":[{"title":"0.8 mm","offer_id":50486281765055,"sku":"MB-DIAMONDBIT-08","price":16.99,"currency_code":"USD","in_stock":true},{"title":"2.5 mm","offer_id":50486281830591,"sku":"MB-DIAMONDBIT-25","price":16.99,"currency_code":"USD","in_stock":true},{"title":"2.0 mm","offer_id":50486281863359,"sku":"MB-DIAMONDBIT-20","price":16.99,"currency_code":"USD","in_stock":true},{"title":"1.2 mm","offer_id":50486281896127,"sku":"MB-DIAMONDBIT-12","price":16.99,"currency_code":"USD","in_stock":true},{"title":"1.0 mm","offer_id":50486281928895,"sku":"MB-DIAMONDBIT-10","price":16.99,"currency_code":"USD","in_stock":true},{"title":"1.8 mm","offer_id":50486281961663,"sku":"MB-DIAMONDBIT-18","price":16.99,"currency_code":"USD","in_stock":true},{"title":"1.5 mm","offer_id":50486281994431,"sku":"MB-DIAMONDBIT-15","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sb14694e1071d451cb4a652888f683421A.webp?v=1789641727"},{"product_id":"diamond-needle-file-set-10-piece","title":"Diamond Needle File Set, 10 Pieces","description":"\u003cp\u003eYou drilled the hole. Now there is a burr on the far side, and a fingernail catches on it. That is what these are for.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sf3a18cf241744c98b0bf0bd34fbd3877e.webp?v=1789872126\" alt=\"The ten file shapes side by side\" width=\"800\" height=\"800\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eTen files, 3 mm round shanks, 140 mm long overall with roughly 50 mm of working surface. The cutting faces are steel coated with diamond grit, not cut teeth. That matters: cut teeth clog and go blunt on hard material, and they will not touch glass, ceramic or hardened steel at all. Diamond grit cuts all of those, and keeps cutting after the point where a toothed file has given up.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sb3deb9608a874c6ba107b625b1b75679s.webp?v=1789872125\" alt=\"Close view of the diamond grit surface\" width=\"800\" height=\"800\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eGrit is 150. Coarse enough to move material, fine enough that the surface it leaves does not need a second pass with anything else for most bench work.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sc50aef85c5fd4704ad1ac3780cadc1eeU.webp?v=1789872125\" alt=\"A needle file in use on a workpiece\" width=\"800\" height=\"800\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eThe ten shapes\u003c\/h3\u003e\n\u003cp\u003eFlat, half-round, round, square, triangular, knife, oval, and three tapered points in different sections. The round and the tapered points are the two you will reach for first if you are opening drilled holes. The knife is for cleaning out a corner that a round file rides straight past.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S2dc8936190fd40be820a0a814d62a6aaD.webp?v=1789967262\" alt=\"The ten profiles fanned out\" width=\"800\" height=\"800\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eGetting the most from them\u003c\/h3\u003e\n\u003cp\u003eThese are needle files for work you hold in one hand - light strokes keep the grit cutting. A drop of water or light oil and a slower stroke keeps them sharp far longer on steel. Store them in a pencil roll or the box they arrive in rather than loose in a drawer. No case is included.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked, to the United States, Australia, New Zealand and Canada alike. \u003cstrong\u003eOne to two weeks.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"Default Title","offer_id":50485916500159,"sku":"MB-NEEDLEFILE-10","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S4feca37ad3c24a50a3a1db9315b5f970q.webp?v=1789872125"},{"product_id":"sanding-drum-set-102-piece","title":"Sanding Drum Set for Rotary Tools, 102 Pieces","description":"\u003cp\u003eA file cuts flat. A sanding drum cuts round, which is what you need the moment a hole is the wrong shape rather than the wrong size.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/H216abcbc53b544129371a446df5b291ce.webp?v=1789872857\" alt=\"The three grits side by side\" width=\"800\" height=\"800\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003e102 pieces: sanding bands in 80, 120 and 180 grit, with the mandrels that hold them. The mandrel has a 3.175 mm shank - the same eighth-inch shank as a standard rotary tool bit, which means it also goes straight into the chuck on the Mikrabench drill press.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/H7e48298c448b447cac8727ce6971c813J.webp?v=1789872857\" alt=\"A band fitted on its mandrel\" width=\"800\" height=\"800\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHow the bands work\u003c\/h3\u003e\n\u003cp\u003eThe mandrel is a rubber drum with a screw in the end. Tighten the screw and the rubber swells outward, gripping the band from the inside. That is the whole mechanism, and it is why the band comes off in five seconds when it stops cutting. There is no adhesive and nothing to clean off.\u003c\/p\u003e\n\u003cp\u003eStart at 80 to move material. Go to 120 once the shape is right. Finish at 180. Skipping straight to 180 on a rough edge just loads the band with swarf.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/H0a87eab020a04fd395ae8830588bb181j.webp?v=1789872857\" alt=\"Sanding drum in use on a workpiece\" width=\"800\" height=\"800\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eGetting the most from them\u003c\/h3\u003e\n\u003cp\u003eBands are consumables - that is why you get a hundred of them. Change a band when it starts sliding instead of cutting. Run them slow: in the drill press, the low end of the speed range is where they belong.\u003c\/p\u003e\n\u003cp\u003eFor wood, plastic, resin, soft metal and cleaning up an edge. Not for hardened steel.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked, to the United States, Australia, New Zealand and Canada alike. \u003cstrong\u003eOne to two weeks.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"Default Title","offer_id":50491948466367,"sku":"MB-SANDDRUM-102","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S03fc3e76080e4e29804f9dfbb231be79x.webp?v=1789872857"},{"product_id":"cordless-rotary-pen","title":"Cordless Rotary Tool Pen, 3 Speeds, Engraving","description":"\u003cp\u003eThe drill press holds the work still and brings the tool down. Sometimes you need the opposite: the work stays where it is and the tool comes to it. That is this.\u003c\/p\u003e\n\u003cp\u003eCordless, 3.6 V, charged over USB from anything that charges a phone. 700 mAh cell inside. Three speeds - roughly 5,000, 10,000 and 15,000 rpm - stepped, not a dial, so you pick one and it holds it.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S4b3c028eebe748e2a6f3612b445d90be5.webp?v=1789873074\" alt=\"The three-speed switch\" width=\"1000\" height=\"1000\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eBecause it charges over USB rather than plugging into a wall, there is no plug question on this one: it works the same in the United States, Australia or anywhere else.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S57f2aba8a0b945b6895b4e3e04e99c37n.webp?v=1789873074\" alt=\"Pen with accessories\" width=\"1000\" height=\"1000\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eWhy three speeds and not one\u003c\/h3\u003e\n\u003cp\u003eSpeed is not power. On plastic and resin, high speed melts instead of cutting and you end up with a smeared groove and a ball of swarf welded to the bit. On steel, low speed just rubs and work-hardens the surface. The reason the tool has steps is that the right speed is a property of the material, not of how fast you want to be finished.\u003c\/p\u003e\n\u003cp\u003eEngraving glass or stone with a diamond point: slow. Cutting a slot in brass: fast. Sanding a printed part: slow, and let the abrasive do it.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sabe4a00e480549228316ab04cfb976b59.webp?v=1789873074\" alt=\"Engraving with the pen\" width=\"1000\" height=\"1000\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat it does\u003c\/h3\u003e\n\u003cp\u003eIt engraves, grinds, polishes, sands, cuts small stock and drills. It is a pen, held like a pen, and that is its whole advantage - you can see what you are doing and your hand is where the work is.\u003c\/p\u003e\n\u003ch3\u003eHow to get the best from it\u003c\/h3\u003e\n\u003cp\u003eUse light contact and several passes rather than leaning on it - it is built for detail work, not heavy stock removal. Charge it between sessions over USB. Check the collet size against any accessories you already own.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked, to the United States, Australia, New Zealand and Canada alike. \u003cstrong\u003eOne to two weeks.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"50PCS","offer_id":50494103322815,"sku":"MB-ROTARYPEN-50PC","price":69.0,"currency_code":"USD","in_stock":false},{"title":"1PC","offer_id":50494103355583,"sku":"MB-ROTARYPEN-1PC","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S468f15d057f84355aea2d53f637885f6u.webp?v=1789873074"},{"product_id":"deburring-tool-11-blades","title":"Deburring Tool with 11 Spare Blades, Swivel Head","description":"\u003cp\u003eEvery hole you drill has a burr on the far side. A file will take it off and mark the face around it. This takes off the burr and nothing else.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Se1c5506f4066466aa8c857775d1dc605g.webp?v=1789875440\" alt=\"Deburring tool and spare blades\" width=\"1000\" height=\"1000\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eA handle with a swiveling head. Eleven HSS blades in the box.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S2c96426402574479879d37b40a339346w.webp?v=1789875440\" alt=\"The swivelling head\" width=\"1500\" height=\"1500\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eWhy the head swivels\u003c\/h3\u003e\n\u003cp\u003eThe blade is a small hook. Because the head turns freely, the blade follows the edge instead of you having to hold it at a constant angle - you drag it round the rim of the hole and it stays tangent the whole way. That is what gives you one continuous chamfer instead of a series of flats.\u003c\/p\u003e\n\u003cp\u003eIt cuts on the pull. Light pressure, one pass. Leaning on it digs a step.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S88f3677dc4be4d9f85fe1f7fa35c8644V.webp?v=1789875440\" alt=\"Taking a burr off a drilled hole\" width=\"1000\" height=\"1000\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat it works on\u003c\/h3\u003e\n\u003cp\u003eAluminum, brass, copper, mild steel, plastic, resin, 3D-printed parts, the cut end of tube. It is equally at home on a drilled hole, the edge of sheet, and the ragged top layer of a print.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sb6ba7b20c6754865a7e812ca7d4c81c9u.webp?v=1789875440\" alt=\"Blades in the storage box\" width=\"2000\" height=\"2000\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eEleven blades\u003c\/h3\u003e\n\u003cp\u003eWhen a blade starts leaving a shiny rolled edge instead of a clean cut, push it out and fit a fresh one - that is why eleven come in the box. It cuts a small chamfer; for a flush screw head, use a countersink bit in the drill press. Not for hardened steel.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked, to the United States, Australia, New Zealand and Canada alike. \u003cstrong\u003eOne to two weeks.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"Default Title","offer_id":50485843886271,"sku":"MB-DEBURR-11","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sca5dc9f0628c470c9fbf55b5fd2703beK.webp?v=1791160218"},{"product_id":"diamond-sharpening-plate","title":"Diamond Sharpening Plate, 170 x 75 mm","description":"\u003cp\u003eA blunt tool is not just slower. It pushes instead of cutting, and pushing is what tears a workpiece, snaps a small drill and puts your hand where it should not be.\u003c\/p\u003e\n\u003cp\u003eDiamond grit bonded to a steel plate, 170 x 75 mm, on a non-slip base. Sold by grit - buy the one you need, or more than one if you use the tool a lot.\u003c\/p\u003e\n\u003ch3\u003eDiamond, not stone\u003c\/h3\u003e\n\u003cp\u003eA water stone wears into a hollow, and once it is hollow every edge you sharpen on it comes out convex. Diamond plate stays flat because the abrasive is harder than anything you will put on it - it does not dish, it does not need flattening, and it cuts carbide, which no natural stone will touch.\u003c\/p\u003e\n\u003cp\u003eIt also cuts dry. A drop of water keeps swarf clear, but there is no soaking and no slurry.\u003c\/p\u003e\n\u003ch3\u003eThe grits\u003c\/h3\u003e\n\u003cp\u003e400 reshapes - a chipped edge, a burr, a bevel that is the wrong angle. 1000 sharpens; this is the one that does the actual work on a tool that is merely dull. 3000 polishes the edge so it stops grabbing.\u003c\/p\u003e\n\u003cp\u003eMost bench work only needs 1000. If you are restoring old tools rather than maintaining sharp ones, order 400 and 3000 alongside it.\u003c\/p\u003e\n\u003ch3\u003eUsing it\u003c\/h3\u003e\n\u003cp\u003eA new plate cuts fast for the first few uses, then settles. Press lightly and let the abrasive do the work - that keeps the grit in the bond for years. For flat edges: chisels, blades, plane irons and flat-ground edges.\u003c\/p\u003e\n\u003cp\u003eFood-contact and EU conformity marks are listed by the maker.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked, to the United States, Australia, New Zealand and Canada alike. \u003cstrong\u003eOne to two weeks.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"400","offer_id":47513173688511,"sku":null,"price":19.99,"currency_code":"USD","in_stock":true},{"title":"1000","offer_id":47513173983423,"sku":null,"price":19.99,"currency_code":"USD","in_stock":true},{"title":"3000","offer_id":47513174016191,"sku":null,"price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S1c7e3b6a0b3f466aa144fc3dc4a107e4m.webp?v=1789880313"},{"product_id":"pcb-micro-drill-bits-assorted","title":"PCB Micro Drill Bit Set, 10 Pieces, 1\/8 in Shank","description":"\u003cp\u003eOur other bit packs give you ten of one size, which is what you want once you know the size. This is for before you know it: ten different sizes stepping through a range, so the hole you need is already in the box.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S8a7eb932297f4ac599aa8f69d6d260d97.webp?v=1789880396\" alt=\"Uniform 3.175 mm shanks\" width=\"960\" height=\"960\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eTungsten carbide, 3.175 mm shank on every bit regardless of the cutting diameter.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S69738333343a411abcbe03a86583fc3bB.webp?v=1789880396\" alt=\"Bit tips close up\" width=\"960\" height=\"960\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eStarter kit: 30 bits, 0.1 to 2.5 mm, $39.99\u003c\/h3\u003e\n\u003cp\u003eNot sure which range you need? Take the starter kit: three sets in one order - 0.1 to 1.0, 1.1 to 2.0 and 1.6 to 2.5 mm, thirty bits in all. Bought separately those three sets come to $55.97. It covers board work, through-hole parts and small brass in one go.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S1efe31c756cf4b2e8d298cc41b1c61bcp.webp?v=1789880396\" alt=\"Drilling a circuit board\" width=\"800\" height=\"800\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eThe uniform shank is the point\u003c\/h3\u003e\n\u003cp\u003eA 0.3 mm drill with a 0.3 mm shank cannot be held by an ordinary chuck at all, and it snaps the moment it is not running true. These are ground down from a 3.175 mm body, so every bit in the set clamps the same way, runs concentric, and has a solid shoulder behind the cutting end. Our chuck takes 0.3 to 4 mm, so the whole range fits without changing anything.\u003c\/p\u003e\n\u003ch3\u003eChoosing a range\u003c\/h3\u003e\n\u003cp\u003e0.1 to 1.0 is board work - vias, fine component legs, watch and model parts. 0.6 to 1.5 covers most through-hole components. 1.1 to 2.0 and 2.1 to 3.0 move into general small-part drilling where you want a step between sizes rather than one size repeated.\u003c\/p\u003e\n\u003ch3\u003eHow to run carbide\u003c\/h3\u003e\n\u003cp\u003eCarbide holds an edge far longer than HSS. Clamp the work and drill straight down - carbide dislikes side load. Run them fast and feed them lightly: a slow feed, not a slow spindle, is what keeps the tip sharp. The finest sizes, below about 0.5 mm, are consumables.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked, to the United States, Australia, New Zealand and Canada alike. \u003cstrong\u003eOne to two weeks.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"PCB 1.6-2.5mm 10pcs","offer_id":50480051224767,"sku":"MB-PCB-1625","price":21.99,"currency_code":"USD","in_stock":true},{"title":"PCB 2.1-3.0mm 10pcs","offer_id":50480051257535,"sku":"MB-PCB-2130","price":24.99,"currency_code":"USD","in_stock":true},{"title":"PCB 0.6-1.5mm 10pcs","offer_id":50480051290303,"sku":"MB-PCB-0615","price":16.99,"currency_code":"USD","in_stock":true},{"title":"PCB 1.1-2.0mm 10pcs","offer_id":50480051323071,"sku":"MB-PCB-1120","price":18.99,"currency_code":"USD","in_stock":true},{"title":"PCB 0.3-1.2mm 10pcs","offer_id":50480051355839,"sku":"MB-PCB-0312","price":14.99,"currency_code":"USD","in_stock":true},{"title":"PCB 0.5-1.4mm 10pcs","offer_id":50480051388607,"sku":"MB-PCB-0514","price":15.99,"currency_code":"USD","in_stock":true},{"title":"PCB 0.1-1.0mm 10pcs","offer_id":50480051421375,"sku":"MB-PCB-0110","price":14.99,"currency_code":"USD","in_stock":true},{"title":"Starter kit, 3 sets, 30 bits (0.1-1.0 + 1.1-2.0 + 1.6-2.5mm)","offer_id":67658626171071,"sku":"MB-PCB-KIT30","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/pcb-bits-assorted.jpg?v=1789933759"},{"product_id":"micro-tap-set-m1-m3-5","title":"Micro Tap Set M1 to M3.5, 10 Pieces","description":"\u003cp\u003eYou drilled the hole. Now something has to screw into it.\u003c\/p\u003e\n\u003cp\u003eTen machine screw taps - M1.0, M1.2, M1.4, M1.6, M1.7, M1.8, M2.0, M2.5, M3.0 and M3.5 - straight flute, in a plastic case with a slot for each size.\u003c\/p\u003e\n\u003ch3\u003eThe sizes are the point\u003c\/h3\u003e\n\u003cp\u003eMost tap sets start at M3 and climb, because that is where the volume is. Below M3 is where watch plates, small enclosures and instrument work actually live, and six of these ten taps are under M2.\u003c\/p\u003e\n\u003cp\u003eLengths: M3.5 is 53 mm, M3 is 51 mm, M2.5 is 46.5 mm. The smaller sizes are shorter again.\u003c\/p\u003e\n\u003ch3\u003eHow not to snap one\u003c\/h3\u003e\n\u003cp\u003eAn M1 tap breaks if you lean on it, and getting the broken half out of a finished part is worse than starting the part again. Two things prevent it: the tap goes in square, and it cuts rather than gets forced.\u003c\/p\u003e\n\u003cp\u003eSquare is what a drill press is for. Put the tap in the chuck, bring it down to the hole, and turn the chuck by hand with the power off. The quill holds the tap perpendicular while the first threads bite. Three or four turns in, the thread is started straight and you can finish it with a tap wrench.\u003c\/p\u003e\n\u003cp\u003eCutting rather than forcing means backing off - roughly half a turn in, a quarter turn back, to break the chip. And a drop of oil, every time.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eFor brass, aluminum, copper and mild steel - not for hardened steel.\u003c\/p\u003e\n\u003cp\u003eTaps only. No wrench, no dies, no drill bits.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked, to the United States, Australia, New Zealand and Canada alike. \u003cstrong\u003eOne to two weeks.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"Default Title","offer_id":50486386688191,"sku":"MB-TAPSET-M1-M3.5","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S9aae234763b44b538afba92d3f8ce0cfB.webp?v=1789933298"},{"product_id":"tap-wrench-m1-m8","title":"Tap Wrench M1 to M8, Two Handles","description":"\u003cp\u003eThe taps go in this. Two handles, one in each hand, so the turning force is balanced and the tap stays upright - which is the whole reason small taps survive.\u003c\/p\u003e\n\u003cp\u003eFour jaws close on square tap shanks from M1 to M8. Total length 135 mm.\u003c\/p\u003e\n\u003ch3\u003eWhy a bar and not a T-handle\u003c\/h3\u003e\n\u003cp\u003eWith a T-handle you push from one side, and a side load is exactly what snaps an M1 tap. With a bar you hold both ends at equal pressure and you can feel the moment the tap stops cutting and starts binding. At this thread size, feel is the only feedback you get.\u003c\/p\u003e\n\u003cp\u003eThe knurled sleeve drives the jaws. Turn it, the jaws close on the square shank, and the tap ends up on the centerline instead of off to one side.\u003c\/p\u003e\n\u003ch3\u003eWhat it is made of\u003c\/h3\u003e\n\u003cp\u003e45-grade steel bar, alloy steel jaws and a carbon steel body.\u003c\/p\u003e\n\u003ch3\u003eHow to use it with the smallest taps\u003c\/h3\u003e\n\u003cp\u003eFor M1, start the thread with the tap held in a drill press chuck and turned by hand, then move to this wrench once the thread has bitten.\u003c\/p\u003e\n\u003cp\u003eWrench only. Taps sold separately.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked, to the United States, Australia, New Zealand and Canada alike. \u003cstrong\u003eOne to two weeks.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"Default Title","offer_id":50486546301119,"sku":"MB-TAPWRENCH-M1-M8","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S1c86837df35d45ea84bb6fbc636e1ffd2.webp?v=1789933439"},{"product_id":"centre-drill-for-a-mini-drill-press-1-5-mm-tip","title":"Center Drill 1.5 mm Tip for Mini Drill Press","description":"\u003cp\u003eA twist drill set down on a flat face skates before it bites. On a small press you see it as a hole that lands half a millimeter off your mark. A center drill doesn't skate. It is short and stiff, with a 60° point, and it cuts a cone exactly where you put it. Your drill bit then drops into that cone and follows it straight down.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sc6e01b65e5944a8c9888031800dcb91c1.webp?v=1791161892\" alt=\"HSS center drill, 60 degree tip, close-up\" width=\"1000\" height=\"1000\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003cp\u003eSpot the hole with the center drill, just deep enough that the cone is as wide as the bit that comes next. Swap to your drill bit. Same spot, straight hole.\u003c\/p\u003e\n\u003cp\u003eGood in brass, aluminum, plastics and PCB.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sd45e70f5ac3d4e5dbf60d8f76ba61c29L.webp?v=1791161892\" alt=\"Center drill size chart\" width=\"1000\" height=\"1000\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eSize and fit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTip: 1.5 mm, 60° cone\u003c\/li\u003e\n\u003cli\u003eBody: 4 mm. Fits the chuck on our Mini drill press (0.3 to 4 mm) and the B10 keyed chuck\u003c\/li\u003e\n\u003cli\u003eDouble-ended: when one tip dulls, turn it round\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked to the United States, Australia, New Zealand and Canada. One to two weeks. 30-day returns from the day it arrives.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"Default Title","offer_id":67505286840511,"sku":"MB-CENTREDRILL-15","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sae65c31deea74996a9b2b4e13f273e33g.webp?v=1790462934"},{"product_id":"cordless-engraving-pen-kit","title":"Cordless Engraving Pen Kit, USB-C Rechargeable Mini Rotary Tool with 30 Diamond Burrs, for Glass, Wood, Stone, Shell and Jewelry","description":"\u003cp\u003e\u003cstrong\u003eThe gift that makes gifts.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/engraving-pen-free-stencil-pack.jpg?v=1791586794\" alt=\"Engraving pen kit with free printable stencil pack: letters, numbers, Christmas words and designs\" width=\"1600\" height=\"1600\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eA cordless engraving pen that writes on glass, wood, stone and shells. Hold it like a marker, press the button, and put a name, a date or a little drawing on almost anything. Then do it again for the next birthday, wedding and Christmas.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S5547f7a5301b442b8e2611b7059f81afS.webp?v=1791507785\" alt=\"Engraving a reindeer and sleigh into a wood slice with the cordless engraving pen\" width=\"1600\" height=\"1600\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat they will make with it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWine glasses and mugs\u003c\/strong\u003e with names for a wedding table or a family dinner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWooden boards and coasters\u003c\/strong\u003e with initials and a date\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChristmas ornaments\u003c\/strong\u003e with each child's name and the year\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePet tags, keychains and dog bowls\u003c\/strong\u003e with the pet's name\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStones and shells\u003c\/strong\u003e from a trip, marked with the place and date\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTools and gear\u003c\/strong\u003e marked so they always come back\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S51d37d48e5d84fb08efd9bbfd3da3bc5l.webp?v=1791507785\" alt=\"Engraving pen controls: three speeds 5000, 10000 and 18000 rpm, USB-C charging, 2.35 mm collet\" width=\"1600\" height=\"1600\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eWho it is for\u003c\/h3\u003e\n\u003cp\u003eMum who loves crafts. Dad who fixes things in the garage. The friend who makes resin pieces, jewelry or wood signs. Anyone who prefers a gift that keeps giving over one more thing on a shelf.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sd77c1c27756d466397e356d5d0ec5db27.webp?v=1791507785\" alt=\"Engraving on glass, shell, ceramic, jade, crystal and wood\" width=\"1600\" height=\"1600\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eEasy from the first minute\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo cord.\u003c\/strong\u003e Rechargeable, charging cable in the box. Charge it with that cable from any USB port or plug. Some USB-C to USB-C phone chargers won't charge it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree speeds on one button:\u003c\/strong\u003e 5,000, 10,000 and 18,000 rpm. Slow for glass, fast for wood.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall and light,\u003c\/strong\u003e 125 mm long, so lines stay steady.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverload light\u003c\/strong\u003e tells you when you press too hard.\u003c\/li\u003e\n\u003cli\u003eStandard 2.35 mm (3\/32 in) collet, so spare burrs are easy to find.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree printable stencil pack\u003c\/strong\u003e with block, serif and script letters, numbers, ready words like \"Merry Christmas\" and \"Mr \u0026amp; Mrs\", and little designs to trace. \u003ca href=\"\/pages\/engraving-stencils\"\u003eSee the stencils\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEverything in one box, 56 pieces\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEngraving pen and USB charging cable\u003c\/li\u003e\n\u003cli\u003e30 diamond burrs in a case, for fine lines and shading\u003c\/li\u003e\n\u003cli\u003e3 cutting discs, 5 felt polishing wheels, 10 sanding bands\u003c\/li\u003e\n\u003cli\u003e2 drill bits, mandrels and a wire brush\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eReady to wrap. No extra tools to buy. \u003cstrong\u003ePlus the free printable stencil pack\u003c\/strong\u003e, so even a first-timer gets a neat name on the first try.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorks on\u003c\/strong\u003e glass, wood, shell, ceramic, stone, jade, crystal, resin and soft metals.\u003c\/p\u003e\n\u003ch3\u003ePairs well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/diamond-burr-set-30-pieces-2-35mm\"\u003e\u003cstrong\u003eSpare diamond burrs, 30 pieces, $16.99\u003c\/strong\u003e\u003c\/a\u003e: same 2.35 mm shank, for when the first set wears down.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/jewellers-loupe-triplet-21mm\"\u003e\u003cstrong\u003eJeweler's triplet loupe, $16.99\u003c\/strong\u003e\u003c\/a\u003e: check fine letters and small designs up close.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/scriber-pen-20-tips\"\u003e\u003cstrong\u003eCarbide scriber pen, $24.99\u003c\/strong\u003e\u003c\/a\u003e: scratch the outline by hand first, then go over it with the pen.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eItems from different listings ship separately, each with its own tracking number.\u003c\/p\u003e\n\u003ch3\u003eGetting it there in time\u003c\/h3\u003e\n\u003cp\u003eFree tracked shipping. \u003cstrong\u003eUSA:\u003c\/strong\u003e 7 to 14 business days, so order by early December for Christmas. \u003cstrong\u003eAustralia and New Zealand:\u003c\/strong\u003e two to three weeks, so order by late November.\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"56-piece kit","offer_id":67608474910911,"sku":"MB-ENGRAVEPEN-56","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S1ea64b30a4d94b5bbec45b91601ed022t.webp?v=1791511621"},{"product_id":"diamond-burr-set-30-pieces-2-35mm","title":"Diamond Burr Set for Engraving Pen, 30 Pieces, 2.35 mm Shank","description":"\u003cp\u003e\u003cstrong\u003eSpare diamond burrs for the engraving pen.\u003c\/strong\u003e Thirty diamond-coated burrs on a 2.35 mm (3\/32 in) shank: the same shank size as our cordless engraving pen, so they drop straight into its collet. They also fit any rotary tool with a 2.35 mm collet.\u003c\/p\u003e\u003cp\u003eBurrs wear with use, glass and stone fastest. Keep a fresh set in the drawer and the next name on a glass comes out as clean as the first.\u003c\/p\u003e\u003ch3\u003eWhat is in the set\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e30 diamond-coated burrs in assorted shapes: cones, cylinders, needle points and fine tips for outlines, shading and detail\u003c\/li\u003e\n\u003cli\u003e2.35 mm (3\/32 in) shank\u003c\/li\u003e\n\u003cli\u003eClear plastic case with a rack, one slot per burr\u003c\/li\u003e\n\u003cli\u003eFor glass, stone, ceramic, shell, wood and resin\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLet the burr do the work: light pressure, steady speed. Pressing hard wears the diamond coating faster.\u003c\/li\u003e\n\u003cli\u003eA drop of water on glass and stone keeps the burr cool and the line clean.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDelivery\u003c\/h3\u003e\u003cp\u003eFree and tracked, to the United States, Canada, Australia and New Zealand. Two to three weeks.\u003c\/p\u003e\u003cp\u003e30-day returns from the day it arrives.\u003c\/p\u003e","brand":"ARVONELLE","offers":[{"title":"30pcs 2.35mm","offer_id":67626364960959,"sku":"14:202520811#30pcs 2.35mm","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/HTB1IZowXIfrK1RjSszcq6xGGFXay.webp?v=1791591565"},{"product_id":"fine-drilling-starter-set","title":"Fine Drilling Starter Set: PCB Bits, Diamond Bits, Cobalt Bits and Center Drill","description":"\u003cp\u003e\u003cstrong\u003eFour packs of bits that cover most small drilling, from circuit boards to glass and shell.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sb14694e1071d451cb4a652888f683421A_1624f27c-3cc6-41c0-ae50-cf6429814a41.webp?v=1792793213\" alt=\"Diamond tipped drill bits\" width=\"500\" height=\"500\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eSpot the hole first, then pick the bit for the material. This set gives you one of each kind, so you are not stopped halfway through a job for want of the right bit.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sd4041dd0bf57483a9dd3a6ab84fccc25m_956daffc-108f-4d20-8d0c-1e24bc391a56.webp?v=1792793214\" alt=\"Cobalt drill bit set 0.5 to 3 mm\" width=\"1001\" height=\"1001\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eIn the set\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePCB micro drill bits, 1.0 mm, 10 pieces.\u003c\/strong\u003e Carbide, 3.175 mm (1\/8 in) shank. For circuit boards, plastics and brass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiamond tipped drill bits, 2.0 mm, 10 pieces.\u003c\/strong\u003e For glass, stone, shell and ceramic. Drill slowly with water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCobalt drill bit set, 0.5 to 3 mm, 10 sizes.\u003c\/strong\u003e For steel, brass and aluminium.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter drill with a 1.5 mm tip.\u003c\/strong\u003e Starts the hole exactly where you marked it, so the bit does not wander.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou need a chuck that closes down to 0.5 mm, such as a mini drill press or a rotary tool with a drill chuck.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sae65c31deea74996a9b2b4e13f273e33g_901d36cd-87c1-427e-8f79-07afe7922d74.webp?v=1792793214\" alt=\"Center drill with 1.5 mm tip\" width=\"1000\" height=\"1000\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat you save\u003c\/h3\u003e\n\u003cp\u003eBought one by one these come to $55.96. As a set: \u003cstrong\u003e$44.99\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked to the United States, Australia, New Zealand and Canada. The packs come from different workshops, so they may arrive in two or three parcels a few days apart. Most orders arrive in one to three weeks.\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives.\u003c\/p\u003e","brand":"ARVONELLE","offers":[{"title":"Default Title","offer_id":67749843271871,"sku":"MB-SET-FINEDRILL","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/pcb-bits-one-size_276b4ab2-7953-4132-a241-d2709df9ffb4.jpg?v=1792793214"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/collections\/Sb14694e1071d451cb4a652888f683421A.webp?v=1789744852","url":"https:\/\/arvonelle.com\/collections\/drills-and-bits.oembed?page=2","provider":"ARVONELLE","version":"1.0","type":"link"}