{"title":"Drill press and upgrades","description":"\u003cp\u003eThe machine, the parts that bolt to it, and the spares that wear out. Start here if you are buying the press, or replacing something on one you already have.\u003c\/p\u003e","products":[{"product_id":"mikrabench-mini-drill-press","title":"Mini Drill Press for Jewelry Making, Watchmaking and PCB, Benchtop Drill with Variable Speed and 0.3-4 mm Chuck","description":"\u003cp\u003e\u003cstrong\u003eFree with any kit of this press: a pack of 10 PCB micro drill bits (US$12.99 in our shop).\u003c\/strong\u003e The 3.175 mm shank fits this chuck. They ship separately with their own tracking number, in 1 to 2 weeks.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/IMG-3872.jpg?v=1791063452\" alt=\"Mikrabench lineup: chuck mini drill press, collet drill press, micrometer drill press and 120 x 150 mm base plate\" width=\"1932\" height=\"2576\" style=\"width:100%;max-width:480px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePick the right Mikrabench for your bench\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThis press: 0.3–4 mm chuck, from $129.\u003c\/strong\u003e Takes ordinary twist bits. The all-rounder.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/micrometer-depth-stop\"\u003e\u003cstrong\u003eMicrometer Depth Stop Kit, $59.99\u003c\/strong\u003e\u003c\/a\u003e: bolts onto this press (left in the photo) so every hole stops at the same depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/mikrabench-collet-drill-press\"\u003e\u003cstrong\u003eCollet Drill Press, $179\u003c\/strong\u003e\u003c\/a\u003e: 3.175 mm collet for carbide PCB bits.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/mikrabench-micrometer-drill-press\"\u003e\u003cstrong\u003eMicrometer Drill Press, $199\u003c\/strong\u003e\u003c\/a\u003e: the collet press with a micrometer depth stop, set to 0.01 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/drill-press-base-plate-120-x-150-mm\"\u003e\u003cstrong\u003eBase Plate 120 × 150 mm, $58.99\u003c\/strong\u003e\u003c\/a\u003e: fits all three (13 mm column) and gives you holes to bolt a vise.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eA real drill press for the holes a hand drill can't manage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 0.3 mm bit goes into a watch plate, a circuit board or a piece of model brass straight down, right on the mark. Belt drive, aluminum body, and small enough to live on the corner of your bench.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S2cd15fc21131439c89ec1aeca63b7ee7N.webp?v=1789511347\" alt=\"Mini drill press drilling a small part\" width=\"850\" height=\"850\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChuck takes bits from 0.3 to 4 mm\u003c\/li\u003e\n\u003cli\u003eSpeed dial on the power adapter, 400 to 4500 rpm\u003c\/li\u003e\n\u003cli\u003eHead swings 360° and slides up and down the 13 mm column\u003c\/li\u003e\n\u003cli\u003eWood, plastic and circuit board up to 4 mm; brass and aluminum up to 1 mm\u003c\/li\u003e\n\u003cli\u003e30 W, 12 V; the adapter runs on any wall power from 100 to 240 V\u003c\/li\u003e\n\u003cli\u003e100 × 80 × 180 mm. Factory model TZ-525\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S8bd2748479554988b777121cb9294f2aR.webp?v=1789511346\" alt=\"Mini drill press, side view\" width=\"850\" height=\"850\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePick your kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBench Kit, $129\u003c\/strong\u003e — the press, speed-control adapter, chuck key, 3 mm hex key and a spare belt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBench Kit + 10 Cobalt Bits, $145\u003c\/strong\u003e — everything in the Bench Kit plus a 10-piece cobalt drill set, 0.5 to 3 mm. Ready to drill the day it arrives.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWatchmaker Kit, $209\u003c\/strong\u003e — the Bench Kit plus a drill press vise, a 3.5 in clamp-on bench vise and a dial indicator with magnetic base.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePCB Kit, $219\u003c\/strong\u003e — the Watchmaker Kit plus a 10-piece cobalt drill set 0.5–3 mm and an automatic center punch.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo bolt the vise under the chuck, add the 120 × 150 mm base plate: it replaces the stock base and carries the mounting holes.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/IMG-3873.jpg?v=1791063452\" alt=\"Mikrabench drill presses with micro-feed kit parts and base plate\" width=\"1932\" height=\"2240\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTen minutes to set up\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eArrives in three pieces: head, column, base. Slide the column in, drop the head on, tighten two screws. The key is in the box.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S514afe2493f34eaa9d6a56198f170503Y.webp?v=1789511346\" alt=\"Mini drill press head and chuck\" width=\"850\" height=\"850\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it mill?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is built for drilling. Milling puts side load on the bit, and that needs an ER11 collet spindle in place of the chuck.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sd88e81a347c14a5686e7545a3b992ef2F.webp?v=1789511346\" alt=\"Mini drill press belt drive pulleys\" width=\"850\" height=\"850\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePairs well with\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor circuit boards: \u003ca href=\"\/products\/micro-drill-bits-20\"\u003ePCB micro drill bits, 10 of one size, $12.99\u003c\/a\u003e and the \u003ca href=\"\/products\/circuit-board-holder-rotating\"\u003e360° rotating PCB holder, $40.99\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor watch work: the \u003ca href=\"\/products\/drill-press-vise\"\u003edrill press vise, $59\u003c\/a\u003e or the \u003ca href=\"\/products\/brass-watch-vise-with-graduated-staff-plate\"\u003ebrass watch vise, $65.99\u003c\/a\u003e, so the part is clamped instead of held by hand\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eItems from different listings ship separately, each with its own tracking number.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCovered\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFree tracked shipping. In the US the press ships from a US warehouse and arrives in 3 to 7 business days (the drill bits and the Watchmaker and PCB Kit extras follow separately in 1 to 2 weeks). Australia and New Zealand: two to three weeks. 30-day returns. If any part breaks in the first 12 months, we post a new one free.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"Bench Kit","offer_id":46207864144063,"sku":"MB-DP-BENCH","price":129.0,"currency_code":"USD","in_stock":true},{"title":"Bench Kit + 10 Cobalt Bits","offer_id":67647770099903,"sku":"MB-DP-BENCH-BITS","price":145.0,"currency_code":"USD","in_stock":false},{"title":"Watchmaker Kit","offer_id":46207864176831,"sku":"MB-DP-WATCH","price":209.0,"currency_code":"USD","in_stock":true},{"title":"PCB Kit","offer_id":46207864209599,"sku":"MB-DP-PCB","price":219.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sbc0b4bfd89974959896810cefed3f4c8B.webp?v=1789511346"},{"product_id":"spare-drive-belt","title":"Mini Drill Press Drive Belts, Pack of 20","description":"\u003cp\u003e\u003cstrong\u003eThe small round ring that drives the spindle. Twenty of them, in one bag.\u003c\/strong\u003e It is the part that wears first, and changing it is a five-second job with no tools.\u003c\/p\u003e\u003ch3\u003eWhy twenty, and why it is an O-ring\u003c\/h3\u003e\u003cp\u003eThe spare belt from the machine's box measures 2.8 mm thick and 62 mm across the outside, black rubber. That is not a special drive belt. It is a standard nitrile O-ring.\u003c\/p\u003e\u003cp\u003eSo we sell them by the bag. Twenty rings is years of spares for one press, with some left over for the rest of the bench.\u003c\/p\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eEvery press ships with one spare ring loose in the carton, alongside the one fitted to the pulleys. And for twelve months from your order, a belt is free: if yours goes inside the first year, tell us and we post one, with no charge and no postage. This bag is for the years after that, or for when the carton spare is used up.\u003c\/p\u003e\u003ch3\u003eWhat it is\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize.\u003c\/strong\u003e 60 mm outside diameter, 3 mm section, black nitrile rubber (NBR). That sits a touch tighter on the pulleys than the 62 mm, 2.8 mm ring from the box. On rubber that is normal, and it is what stops a ring from slipping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo tools.\u003c\/strong\u003e Lift the old ring off both pulleys, roll a new one on, done.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRings only.\u003c\/strong\u003e Twenty loose rings in a bag. No machine, no pulleys.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIf a ring from this bag does not drive your press, write to us and you get your money back.\u003c\/p\u003e\u003ch3\u003eDelivery\u003c\/h3\u003e\u003cp\u003eFree and tracked, to the United States, Australia, New Zealand and Canada. \u003cstrong\u003eOne to two weeks.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"Default Title","offer_id":50485649735871,"sku":"MB-BELT-ORING-20","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/image_5157acbd-09b3-468b-931c-5d487b634395.jpg?v=1790292487"},{"product_id":"power-supply-3-12v","title":"Adjustable Power Supply 3-12 V for Mini Drill Press","description":"\u003cp\u003e\u003cstrong\u003eA spare speed control for your Mini Drill Press, or a supply for the next small DC tool on the bench.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOn our press the speed is set at the power adapter, not on the machine. This supply does the same job: turn the knob from 3 V up to 12 V and the spindle follows. A red readout next to the knob shows the voltage you have set, so you can come back to the same speed every time.\u003c\/p\u003e\u003ch3\u003eWhy keep a spare\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt is the part that works hardest.\u003c\/strong\u003e Every minute the press runs, the adapter is regulating it. A spare on the shelf means a failed adapter never stops a job.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA second small DC tool.\u003c\/strong\u003e An engraver, a mini grinder or a flex shaft on its own supply, so you stop unplugging one to run the other.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA second station.\u003c\/strong\u003e One at each end of the bench, and the cable never crosses your work.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBought the press from us in the last 12 months and the original adapter failed? Email us and we send a replacement free.\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput 100-240 V AC.\u003c\/strong\u003e Works on any wall outlet, no converter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput DC 3 to 12 V, up to 5 A.\u003c\/strong\u003e More current than the press needs, so the voltage holds when the motor starts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKnob with a digital voltage readout.\u003c\/strong\u003e Turn it all the way back and it clicks off.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC plug 5.5 x 2.1 mm\u003c\/strong\u003e, on a lead of about 85 cm. Our press takes a 5.5 mm plug. For any other tool, check the socket size first.\u003c\/li\u003e\n\u003cli\u003eOverload, overvoltage, overcurrent and short-circuit protection built in.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt looks different from the adapter in the press box - a black case with a readout instead of a plain dial. Do not set it above 12 V for the press; this one cannot go higher anyway.\u003c\/p\u003e\u003ch3\u003eWhich plug to pick\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eUS plug in the United States, EU plug in Europe, AU plug in Australia and New Zealand.\u003c\/strong\u003e Same supply inside, same price.\u003c\/p\u003e\u003ch3\u003eDelivery and returns\u003c\/h3\u003e\u003cp\u003eFree tracked shipping, one to three weeks. 30-day returns from the day it arrives; return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"US Plug","offer_id":50479971696831,"sku":"MB-PSU-312-US","price":20.99,"currency_code":"USD","in_stock":true},{"title":"EU Plug","offer_id":50479971795135,"sku":"MB-PSU-312-EU","price":20.99,"currency_code":"USD","in_stock":true},{"title":"AU Plug","offer_id":50479971893439,"sku":"MB-PSU-312-AU","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Hf52ba91c2ddd4393b60786035fcef45cS_54017044-9ef4-43ac-b922-aff4dd71fda0.webp?v=1792078230"},{"product_id":"drill-press-vise","title":"Drill Press Vise for a Mini Drill Press","description":"\u003cp\u003e\u003cstrong\u003eA hard-jawed vise sized for the machine, with machined parallel faces and a screw feed.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA vise that is fixed to the same lump of metal as the column is the single biggest thing you can do for hole position on a small press. Nothing shifts between the mark and the hole because nothing can.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sccccf62faab141e19e6d4bcc7a6e0b497.webp?v=1789511586\" alt=\"Drill press vise jaws\" width=\"800\" height=\"800\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachined jaws, screw feed.\u003c\/strong\u003e Parallel faces, a positive clamp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStacks on the XY stage\u003c\/strong\u003e if you add one later.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sc3c0e4c35aa5411398d4294ee0be85bdT.webp?v=1789511586\" alt=\"Drill press vise holding a small part\" width=\"800\" height=\"800\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eMounting\u003c\/h3\u003e\n\u003cp\u003eThe stock drill press base has one 5 mm chamfered through-hole in the center, with no thread, so the vise needs an adapter plate to bolt down. To bolt the vise under the chuck, add the 120 × 150 mm base plate: it replaces the stock base and carries the mounting holes.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sd053dfe7a3cd4ee2a76ba7284699fc7aZ.webp?v=1789511586\" alt=\"Drill press vise, screw feed\" width=\"800\" height=\"800\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eTake 15% off this vise with a drill press\u003c\/h3\u003e\n\u003cp\u003eBuy it in the same order as any of our three drill presses and this vise drops from $59 to $50.15. The discount applies by itself in the cart - there is no code to remember.\u003c\/p\u003e\n\u003ch3\u003eWhich vise should you buy\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eThis one\u003c\/strong\u003e if you are drilling metal and want a firm grip and a hard jaw.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe brass one\u003c\/strong\u003e if the work is soft or finished and you cannot afford a mark - watch plates, dials, small castings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe bench vises\u003c\/strong\u003e - rotating, fractal, hand, clamp-on, swivel, the ball vise and the toolmaker's vise - if you want something for hand work beside the machine. None of those belongs under the bit.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked, to the United States, Australia, New Zealand and Canada. \u003cstrong\u003eOne to two weeks.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"Silver","offer_id":50485629485247,"sku":"MB-VISE-DP","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S66f869285c774edd956041ff26588569k.webp?v=1789511586"},{"product_id":"xy-stage-60","title":"XY Stage 60 mm, Lead Screw Cross Slide Table","description":"\u003cp\u003e\u003cstrong\u003eA two-axis platform that goes between the drill press base and whatever is holding your work.\u003c\/strong\u003e Clamp once, then move the part under the bit by turning a screw.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S6b8b11c1168f4003871681ac5e3ec8cbw.webp?v=1789511586\" alt=\"XY stage platform, top view\" width=\"1000\" height=\"1000\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e60 by 60 mm table\u003c\/strong\u003e, one lead screw per axis. The 60 is the size of the table, not how far it moves.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachined aluminum.\u003c\/strong\u003e The mass is doing work here: a stage that flexes is worse than no stage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Scd27c9fc32804a33ab37d4dac4f74c79O.webp?v=1789511586\" alt=\"XY stage lead screws\" width=\"1000\" height=\"1000\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eWhy you would want one\u003c\/h3\u003e\n\u003cp\u003eBecause the second hole has to relate to the first. Freehand, you eyeball it and you are out by half a millimeter. With this, you wind the screw and the work moves a known amount.\u003c\/p\u003e\n\u003cp\u003eFor a row of holes longer than the stage travels, you unclamp once in the middle rather than for every hole. That is still the difference between a line and a scatter.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sa04f225b6bc0448280f9048dd2a9ae059.webp?v=1789511586\" alt=\"XY stage, 60 mm\" width=\"1000\" height=\"1000\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eMounting\u003c\/h3\u003e\n\u003cp\u003eThe stock drill press base has one 5 mm chamfered through-hole in the center, with no thread, so the stage needs an adapter plate - a small tapped plate between the base and the stage - to bolt down.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked, to the United States, Australia, New Zealand and Canada. \u003cstrong\u003eTwo to three weeks.\u003c\/strong\u003e This is a heavy machined part and it comes from the workshop.\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"XY axis 60x60","offer_id":50485626110143,"sku":"MB-XY60","price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S762fe7e4e2ee4a6288263d9a18bcc23cI.webp?v=1789511586"},{"product_id":"micrometer-depth-stop","title":"Micrometer Depth Stop Kit for Mini Drill Press — Mikrabench","description":"\u003cp\u003eA drill press quill goes down as far as your hand pushes it. That is fine once. It is not fine forty times, when every hole has to stop at the same depth.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/IMG-3872.jpg?v=1791063452\" alt=\"Mikrabench lineup: chuck mini drill press with micro-feed kit, collet drill press, micrometer drill press and 120 x 150 mm base plate\" width=\"1932\" height=\"2576\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the part that decides instead of your hand. A micrometer head on an aluminum bracket sits on top of the head, with its spindle bearing on the stepped pulley. Wind the thimble to set where the quill stops, then pull the handle as often as you like: every hole ends at the same depth.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/IMG-3873.jpg?v=1791063452\" alt=\"Mikrabench drill presses with micro-feed kit parts and base plate\" width=\"1932\" height=\"2240\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eFitted and tested on our bench\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMikrabench Mini Drill Press (chuck version)\u003c\/strong\u003e - fits. Take off the top cone pulley, put on the stepped pulley from the kit, bolt the bracket down with one screw.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMikrabench Micrometer Drill Press\u003c\/strong\u003e - fits. One bolt out, bracket in, bolt back.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMikrabench Collet Drill Press\u003c\/strong\u003e - does not fit. The top of that head has a different mounting layout.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sc85e5727cf7a47c58a1c293d9cc6cab5E.webp?v=1789952724\" alt=\"The full kit laid out, micrometer, pulley, screw and seven hex keys\" width=\"1000\" height=\"1000\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eAbout a minute with the hex key that comes in the kit. The thimble turns smoothly and the graduations are easy to read.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S9f6f5498e24842d3b3527a760f15d71cJ.webp?v=1789952724\" alt=\"The micrometer bracket and its plunger seen close up\" width=\"1000\" height=\"1000\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat comes in the kit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMicrometer head with its bracket\u003c\/li\u003e\n\u003cli\u003eStepped cone pulley, cut for a round belt\u003c\/li\u003e\n\u003cli\u003eMounting screw\u003c\/li\u003e\n\u003cli\u003eHex keys\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked, to the United States, Australia, New Zealand and Canada. \u003cstrong\u003eThree to four weeks.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"Default Title","offer_id":50480046670015,"sku":"MB-MICROFEED","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S240ab2dcb32840458be9a42b1a8551c4j.webp?v=1789952724"},{"product_id":"chuck-key-0-3-4mm","title":"Chuck Key for 0.3-4 mm Mini Drill Chuck","description":"\u003cp\u003eThe key lives in a drawer, the drawer gets tidied, and the chuck is now a thing you cannot open. A spare key fixes that.\u003c\/p\u003e\n\n\u003ch2\u003eWhich key this is\u003c\/h2\u003e\n\u003cp\u003eThe small one. Chuck keys come in sizes and they are not interchangeable: this pinion measures 11 mm across the teeth and the pilot spigot in the middle is 3 mm. That is the size that turns a 0.3 to 4 mm micro chuck, which is what is fitted to our press.\u003c\/p\u003e\n\u003cp\u003eA chuck key off a hardware-store drill will not work here. Those are built for a 10 or 13 mm chuck and the teeth are far too coarse to reach into this one.\u003c\/p\u003e\n\u003cp\u003eChrome vanadium steel, T-handle.\u003c\/p\u003e\n\n\u003ch2\u003eGood to know\u003c\/h2\u003e\n\u003cp\u003eThe handle length varies a little between production runs. It changes nothing about how the key works, but if you buy two they may not be identical twins.\u003c\/p\u003e\n\u003cp\u003eThis is the key on its own. No chuck comes with it. If you want the chuck as well, the four-piece set is on its own page.\u003c\/p\u003e\n\u003cp\u003eIf it does not fit yours, send a photo, keep it, and we refund you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor twelve months from your order, a replacement key is free.\u003c\/strong\u003e If yours fails or goes missing inside the first year, tell us and we post one, no charge and no postage. This spare is for after that year, or for having one in the drawer instead of waiting for the post.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery\u003c\/h2\u003e\n\u003cp\u003eFree and tracked, to the United States, Australia, New Zealand and Canada. \u003cstrong\u003eOne to two weeks.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"ARVONELLE","offers":[{"title":"Default Title","offer_id":50486370435263,"sku":"MB-CHUCKKEY","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S47f48dfb288f4a40b84c7c81c2e4665cp.jpeg_960x960q75.webp?v=1789691833"},{"product_id":"rotary-stage-60mm","title":"Rotary Stage 60 mm, 360 Degree Micrometer Table","description":"\u003cp\u003eAn XY stage moves the work in a straight line. This one turns it, by a measured amount, and holds the angle while you work.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S96d45b7c15f84cc39da047bb731fa68fb.webp?v=1789885623\" alt=\"The graduated rim and micrometer head\" width=\"1000\" height=\"1000\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003e60 by 60 mm aluminum platform, full 360 degree rotation, driven by a differential micrometer head.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S5d099f4e81794f8db0c5b32856984517K.webp?v=1789885623\" alt=\"Side view of the stage\" width=\"1000\" height=\"1000\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRotation: 360 degrees, continuous\u003c\/li\u003e\n\u003cli\u003eMinimum scale: 0.01 mm on the micrometer head\u003c\/li\u003e\n\u003cli\u003eFine travel: plus or minus 6.5 mm at the drive\u003c\/li\u003e\n\u003cli\u003eLoad: 29.4 N, which is 3 kgf\u003c\/li\u003e\n\u003cli\u003eBody: aluminum alloy\u003c\/li\u003e\n\u003cli\u003eMass: 0.16 kg for the stage, 0.3 kg shipped\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S4e5a0be9a22c404085abc8ab59915a99J.webp?v=1789885623\" alt=\"Mounting face of the platform\" width=\"1000\" height=\"1000\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eWhy a rotary stage and not just turning the part\u003c\/h3\u003e\n\u003cp\u003eBecause unclamping is where the position goes. Once a part is held, every time you free it to turn it you lose the datum you set. A rotary stage turns the whole clamp - part, vise and all - so the center stays where it was and only the angle changes. That is how you drill a bolt circle, or a row of holes at 15 degrees, and have them come out where you meant.\u003c\/p\u003e\n\u003cp\u003eThe differential head is the reason the small movements work. A coarse thread gets you near, a fine one closes the last fraction, and the 0.01 mm scale is what you read while you do it.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eBuilt for precise positioning with a small vise and a small part, up to 3 kgf - it positions the work rather than resisting heavy cutting force.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked, to the United States, Australia, New Zealand and Canada alike. \u003cstrong\u003eOne to two weeks.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"Default Title","offer_id":50487401939135,"sku":"MB-ROTARYSTAGE-60","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S8fca6af260fa47929cd7910915e40a73V.webp?v=1789885623"},{"product_id":"drill-press-base-plate-120-x-150-mm","title":"Mini Drill Press Base Plate, 120 x 150 mm","description":"\u003cp\u003eOpen a mini drill press and look underneath. Four screws hold the rubber feet on, there is one unthreaded hole in the middle, and that is the whole story. There is nothing to bolt a vise to.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/IMG-3874.jpg?v=1791063452\" alt=\"Three Mikrabench drill presses and the 120 x 150 mm base plate with 13 mm column clamp\" width=\"1932\" height=\"2306\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the fix. A 120 x 150 x 6 mm aluminum plate with a split clamp collar at one end. The column comes out of the original base and goes into this one. What you gain is the rest of the plate: two dense clusters of tapped holes that take a 40, 50, 60 or 80 mm sliding stage, corner holes, and rubber feet underneath.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/IMG-3872.jpg?v=1791063452\" alt=\"Mikrabench lineup: chuck mini drill press with micro-feed kit, collet drill press, micrometer drill press and 120 x 150 mm base plate\" width=\"1932\" height=\"2576\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eFits all three Mikrabench drill presses\u003c\/h3\u003e\n\u003cp\u003eThe chuck \u003ca href=\"\/products\/mikrabench-mini-drill-press\"\u003eMini Drill Press\u003c\/a\u003e, the \u003ca href=\"\/products\/mikrabench-collet-drill-press\"\u003eCollet Drill Press\u003c\/a\u003e and the \u003ca href=\"\/products\/mikrabench-micrometer-drill-press\"\u003eMicrometer Drill Press\u003c\/a\u003e all stand on a 13 mm column, and we have fitted this plate to each of them. Get the 13 mm collar.\u003c\/p\u003e\n\u003cp\u003ePairing it with a different machine? Measure the bare column first. Most small machines in this class are 13 mm; the heavier ones are 16 mm, and a 16 mm collar will not close on a 13 mm column.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S97fff9297b454b5ca89f778f4ebec926Z.webp?v=1789947340\" alt=\"The plate held in a hand, showing the two clusters of tapped holes\" width=\"1304\" height=\"1351\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne plate with the clamp collar fitted\u003c\/li\u003e\n\u003cli\u003eRubber feet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S17916f2a0acc408b89d6b556d2e853317.webp?v=1789947341\" alt=\"Close view of the split clamp collar that takes the column\" width=\"1304\" height=\"1415\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe vise and sliding stage in the photos show what the plate is for and are not included. The plate replaces the original base; it does not bolt on top of it.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked, to the United States, Australia, New Zealand and Canada alike. \u003cstrong\u003eOne to two weeks.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"for 13mm column","offer_id":50480049062079,"sku":"MB-BASEPLATE-13","price":58.99,"currency_code":"USD","in_stock":true},{"title":"for 16mm column","offer_id":50480049094847,"sku":"MB-BASEPLATE-16","price":58.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sceb77b638f4e430fa53eef43acd01c4ab.webp?v=1789947340"},{"product_id":"extended-column-for-a-mini-drill-press-300-mm","title":"Mini Drill Press Extended Column, 13 x 300 mm","description":"\u003cp\u003eThe column on a mini drill press is short on purpose - it keeps the machine small. Then you put a vise on the table, or a stage under the vise, and the head is already near the top of its travel with nothing left to raise.\u003c\/p\u003e\u003cp\u003eThis is a longer one. 300 mm instead of the stock 165 mm, so there is another 135 mm of column to move the head up.\u003c\/p\u003e\u003ch3\u003eWhich of our machines\u003c\/h3\u003e\u003cp\u003eMade for the \u003cstrong\u003eMikrabench Mini Drill Press\u003c\/strong\u003e (the 0.3 to 4 mm chuck version), whose column is 13 mm. It is \u003cstrong\u003enot\u003c\/strong\u003e for our Collet or Micrometer presses: the column on those machines is not meant to be extended.\u003c\/p\u003e\u003ch3\u003eThe material matters here\u003c\/h3\u003e\u003cp\u003e45 carbon steel, high-frequency quenched and hardened, then chrome plated. That is what a column is supposed to be. A plain stainless rod of the same diameter looks identical, but it is soft - the split clamps that hold the head will dent it, and a dented column no longer slides square.\u003c\/p\u003e\u003ch3\u003eTwo sizes, and they are not interchangeable\u003c\/h3\u003e\u003cp\u003eMeasure the bare column on your machine before ordering. Ours is 13 mm. The heavier machines in this class are 16 mm. Nothing adapts one to the other.\u003c\/p\u003e\u003ch3\u003eFitting it\u003c\/h3\u003e\u003cp\u003eThe column is not pressed in. It is held by a split clamp at the base and another in the head, so both come loose with a hex key and the old column slides out. Keep the old one - it is the right length when you want the machine compact again.\u003c\/p\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe higher you set the head, the more a side load moves it - that is how any cantilever works. For drilling straight down it is fine.\u003c\/li\u003e\n\u003cli\u003eHow much extra room you actually gain under the chuck depends on where you clamp the head, not only on the length of the rod.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDelivery\u003c\/h3\u003e\u003cp\u003eFree and tracked, to the United States, Australia, New Zealand and Canada alike. \u003cstrong\u003eOne to two weeks.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"Default Title","offer_id":50487089692863,"sku":"MB-COLUMN-EXT300","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/H5c036f6716e74f63a6a2ab4e35e5c571u.webp?v=1789949993"},{"product_id":"mikrabench-collet-drill-press","title":"Collet Drill Press, 3.175 mm, Mini Bench Drill — Mikrabench","description":"\u003cp\u003eThe bit does not sit in a chuck. It sits in a 3.175 mm collet with a brass nose, and a collet grips a shank all the way round instead of on three jaws. That is the whole reason this machine exists. At 0.3 mm the difference between a collet and a chuck is whether the bit walks before it bites.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/IMG-3875.jpg?v=1791063452\" alt=\"Three Mikrabench mini drill presses side by side: chuck, collet and micrometer\" width=\"1915\" height=\"1852\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3.175 mm is the eighth-inch shank.\u003c\/strong\u003e PCB micro bits, tungsten carbide engraving bits and most rotary-tool burrs are ground to it. If your bits have a colored plastic collar on them, they are 3.175 and they will go in. To hold a plain 2 mm twist drill by its own shank, \u003ca href=\"\/products\/mikrabench-mini-drill-press\"\u003eour chuck version takes 0.3 to 4 mm\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S2808ed5ca5784d498bf3dc26911ff8ba9.webp?v=1789996467\" alt=\"The base, two slots and a ring of holes around the centre\" width=\"968\" height=\"942\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eThe base is the part to look at\u003c\/h3\u003e\n\u003cp\u003eTwo long slots through it, and a ring of small holes around a hole in the center. That is a mounting pattern, so you can bolt a vise down instead of holding the work with your fingers.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Scce8c16389e3413586c554f3a39e2506j.webp?v=1789996468\" alt=\"Green round belt on stepped pulleys, lever feed with brass balls\" width=\"1054\" height=\"938\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHow it works\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBelt drive, round green belt, stepped pulleys.\u003c\/strong\u003e Move the belt to another step and the whole speed band shifts. Five seconds, no tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLever feed, two arms, brass ball handles.\u003c\/strong\u003e You pull it down and let it back up. For depth set by the hundredth, see \u003ca href=\"\/products\/mikrabench-micrometer-drill-press\"\u003ethe micrometer machine\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe speed control lives on the power adapter\u003c\/strong\u003e, a dial marked POWER CONTROL. There is no switch on the machine itself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 to 240 V.\u003c\/strong\u003e Wall-outlet voltage is a non-issue on 120 V American and 230 V Australian supply. No converter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrdering from Australia or New Zealand?\u003c\/strong\u003e We send an Australian and New Zealand pin adapter with your machine, free, in its own small parcel. It takes both flat US pins and round European ones, so the plug goes into your wall. If it still does not, tell us and we post you the correct one free, or refund you in full with the return postage on us.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S505261b94d49456581154e7caf7709d5t.webp?v=1789996468\" alt=\"Brass collet nose and the feed lever\" width=\"869\" height=\"857\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat the owners say\u003c\/h3\u003e\n\u003cp\u003eFive ratings, 4.8 average, every one a verified purchase. One owner: it works very well and precisely with a 0.3 mm drill, no trouble. If your machine arrives without its rubber feet, write to us and we send you a set.\u003c\/p\u003e\n\u003ch3\u003eWhat it is for\u003c\/h3\u003e\n\u003cp\u003eWood, plastic, resin, composite panel, PCB, brass, copper, aluminum. Not for hardened steel - and it is a drill, not a mill.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked, to the United States, Australia and New Zealand. \u003cstrong\u003eTwo to three weeks.\u003c\/strong\u003e Not available for delivery to Canada at the moment.\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"Default Title","offer_id":50480026845375,"sku":"MB-DRILL-COLLET","price":179.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sdf163b3be84641c2a57dffbbe35c5c81r.webp?v=1789996467"},{"product_id":"mikrabench-micrometer-drill-press","title":"Micrometer Drill Press, 3.175 mm Collet, 0.01 mm Depth — Mikrabench","description":"\u003cp\u003eA micrometer head sits on top of the spindle. You turn it to set the depth, the thimble reads in hundredths, and the stroke is 10 mm. That is the one thing this machine does that the other two do not, and for a blind hole you have to stop at a depth rather than go through, it is the only thing that matters.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/IMG-3875.jpg?v=1791063452\" alt=\"Three Mikrabench mini drill presses side by side: chuck, collet and micrometer\" width=\"1915\" height=\"1852\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe bit is held in a 3.175 mm collet with a brass nose, not a drill chuck. \u003cstrong\u003e3.175 mm is the eighth-inch shank\u003c\/strong\u003e that PCB micro bits and carbide engraving bits are ground to.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/IMG-3872.jpg?v=1791063452\" alt=\"Mikrabench lineup: chuck mini drill press with micro-feed kit, collet drill press, micrometer drill press and 120 x 150 mm base plate\" width=\"1932\" height=\"2576\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eThe motor head\u003c\/h3\u003e\n\u003cp\u003eThe plate on the motor reads \u003cstrong\u003eTZ-525, 3 to 12 V, 0.3 to 4 mm.\u003c\/strong\u003e It is the same head as \u003ca href=\"\/products\/mikrabench-mini-drill-press\"\u003eour $129 drill press\u003c\/a\u003e, with a micrometer fine feed built on top and, on the version we sell, a collet nose in place of the chuck.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S6f9be5c6237e4a7fb34c67e97f5ef003v.webp?v=1789996468\" alt=\"Micrometer drill press with the 3.175 mm collet fitted\" width=\"1048\" height=\"1243\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eThe base\u003c\/h3\u003e\n\u003cp\u003eFlat plate, four countersunk screws holding the rubber feet, one hole through the middle. The base has no slot or bolt pattern, so a vise cannot be bolted to it.\u003c\/p\u003e\n\u003cp\u003eIf holding the work down is the problem you are solving, \u003ca href=\"\/products\/mikrabench-collet-drill-press\"\u003ethe collet machine at $179 has two slots and a bolt circle\u003c\/a\u003e — and no micrometer. The two machines solve different halves of the same job.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sd15f226729494284b9ebc2d14a64ec4br.webp?v=1789996469\" alt=\"The micro bit case that the seller says ships with it\" width=\"1361\" height=\"926\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003ePower\u003c\/h3\u003e\n\u003cp\u003eThe supply in the box is 3 A. For the full top speed, pair it with \u003ca href=\"\/products\/adjustable-bench-supply-3-24v\"\u003eour 3 to 24 V bench supply\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eThe plug\u003c\/h3\u003e\n\u003cp\u003eInput 100 to 240 V, 50\/60 Hz, so Australian and New Zealand outlets are inside its range and no transformer is needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOrdering from Australia or New Zealand?\u003c\/strong\u003e We send an Australian and New Zealand pin adapter with your machine, free, in its own small parcel. It takes both flat US pins and round European ones, so the plug goes into your wall. If it still does not, tell us and we post you the correct one free, or refund you in full with the return postage on us.\u003c\/p\u003e\n\u003ch3\u003eWhat comes in the box\u003c\/h3\u003e\n\u003cp\u003eThe machine, the speed-control adapter with its dial, and a set of tungsten carbide micro bits from 0.15 to 1.0 mm on 3.175 mm shanks.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked, to the United States, Australia and New Zealand. \u003cstrong\u003eTwo to three weeks.\u003c\/strong\u003e Not available for delivery to Canada at the moment.\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"Default Title","offer_id":50480028614847,"sku":"MB-DRILL-MICRO","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S87d2101b774d41708b6c4c167d82d796u.webp?v=1789996468"},{"product_id":"xy-micrometer-stage-mini-drill-press","title":"XY Micrometer Stage for Mini Drill Press, 40\/60 mm","description":"\u003cp\u003e\u003cstrong\u003eLine the hole up under the bit by turning a knob, not by nudging the part and hoping.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Se01042a41f88496dab40c91afc9d293bk_6998de6a-9619-49fb-a4e3-2805f4fe0c64.webp?v=1790308959\" alt=\"XY micrometer stage, top plate with tapped holes\" width=\"1000\" height=\"1000\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a small two-axis stage of the kind used on optical benches. It sits on the base of a mini drill press, you clamp or tape the work to its top plate, and two micrometer heads move that plate front to back and side to side. Each division on the thimble is a hundredth of a millimeter.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S04cc0c1f160c4b3ba3d6f79613ba9bb3X_2e1e5718-ccae-4c1c-a44c-56a1c803876f.webp?v=1790308959\" alt=\"XY micrometer stage, side view with lock screw\" width=\"1000\" height=\"1000\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo sizes.\u003c\/strong\u003e Top plate 40 x 40 mm or 60 x 60 mm. The 40 fits the base of a small 12 V bench drill more comfortably; the 60 gives a PCB or a watch plate more room.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTravel about 6.5 mm each way\u003c\/strong\u003e on both axes. That is for fine positioning, not for moving a part across the table.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad up to about 2 kg\u003c\/strong\u003e on the 40 and about 4 kg on the 60.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum body, black finish,\u003c\/strong\u003e micrometers on the center of each side.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTapped holes in the top plate\u003c\/strong\u003e for fixing a small vise or a clamp; the drawings in the photos give the positions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sfb902e13acef4074a146aab5c616aef2l_d65653c8-6915-48d0-983b-5b3b4f83be1c.webp?v=1790308959\" alt=\"XY micrometer stage, micrometer heads on the centre of each side\" width=\"1000\" height=\"1000\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eBefore you order\u003c\/h3\u003e\n\u003cp\u003eThe stage adds height under the chuck. Measure the gap between the chuck and the base on your own machine, and check it against the height in the drawing for the size you choose. On a small column press the head can usually be raised to make room.\u003c\/p\u003e\n\u003cp\u003eThe stage sits on the drill press base; fix it with a clamp or double-sided tape.\u003c\/p\u003e\n\u003cp\u003eNeed to raise and lower the work as well? The \u003ca href=\"\/products\/xyz-micrometer-stage-mini-drill-press\"\u003ethree-axis version\u003c\/a\u003e adds a third micrometer for height.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked, to the United States, Australia, New Zealand and Canada alike. \u003cstrong\u003eOne to two weeks.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"ARVONELLE","offers":[{"title":"40 x 40 mm","offer_id":50499886579903,"sku":"14:10#LGY40-C","price":125.0,"currency_code":"USD","in_stock":true},{"title":"60 x 60 mm","offer_id":50499886678207,"sku":"14:366#LGY60-C","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S093c574a440040d6b2e03cc4c73225f4V_dfd0fc3e-7480-4213-bf60-233c31ab843d.webp?v=1790308959"},{"product_id":"xyz-micrometer-stage-mini-drill-press","title":"XYZ Micrometer Stage for Mini Drill Press, 40\/60 mm","description":"\u003cp\u003e\u003cstrong\u003eThe XY stage moves the work side to side and front to back. This one adds a third micrometer that raises and lowers it.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S758fb8f7b0634c6f8239c8703fcca5fbv.webp?v=1790307534\" alt=\"XYZ Micrometer Stage for Mini Drill Press, 40\/60 mm, photo 2\" width=\"1000\" height=\"1000\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThree stages stacked into one block: two sliding stages for X and Y and a lifting stage for Z, each driven by its own micrometer head. Each division on a thimble is a hundredth of a millimeter. On a small drill press the Z axis lets you bring a part up to the bit by a measured amount instead of moving the head on the column.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S19969b40dfe04c95a85462c9b06fb07cL.webp?v=1790307534\" alt=\"XYZ Micrometer Stage for Mini Drill Press, 40\/60 mm, photo 3\" width=\"1000\" height=\"1000\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo sizes.\u003c\/strong\u003e Top plate 40 x 40 mm or 60 x 60 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTravel about 6.5 mm each way\u003c\/strong\u003e on X and Y. It is for fine positioning, not for moving a part across the table.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThreaded holes in the top plate:\u003c\/strong\u003e M3 on the 40 mm stage, M4 on the 60 mm. That is where a small vise or clamp goes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum body, black finish,\u003c\/strong\u003e steel ball guides, a lock screw on each axis, micrometers on the center of each side.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sa046ffca06c54510ad6f8702a4514a3dU.webp?v=1790307534\" alt=\"XYZ Micrometer Stage for Mini Drill Press, 40\/60 mm, photo 4\" width=\"1000\" height=\"1000\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eBefore you order\u003c\/h3\u003e\n\u003cp\u003eThree stacked stages are tall. Measure the gap between the chuck and the base on your own machine and check it against the height in the drawing for the size you choose. On a small column press the head can usually be raised to make room.\u003c\/p\u003e\n\u003cp\u003eThe stage sits on the drill press base; fix it with a clamp or double-sided tape.\u003c\/p\u003e\n\u003cp\u003eIf you only need X and Y, the \u003ca href=\"\/products\/xy-micrometer-stage-mini-drill-press\"\u003etwo-axis version\u003c\/a\u003e is lower and costs less. Need to turn the part as well? The \u003ca href=\"\/products\/xyzr-4-axis-micrometer-stage-60mm-rotary\"\u003eXYZR stage\u003c\/a\u003e adds a 360° rotary table on top.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked, to the United States, Australia, New Zealand and Canada alike. \u003cstrong\u003eOne to two weeks.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"ARVONELLE","offers":[{"title":"X, Y and Z \/ 40 x 40 mm","offer_id":50500027482303,"sku":"100002243:10774722#40x40mm Table;14:175#XYZ-axis Center","price":219.0,"currency_code":"USD","in_stock":true},{"title":"X, Y and Z \/ 60 x 60 mm","offer_id":50500027678911,"sku":"100002243:21449520#60x60mm Table;14:175#XYZ-axis Center","price":239.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S229a3afcabf6460e9ef9d7c98c75e987u.webp?v=1790307534"},{"product_id":"spare-555-motor-mini-drill","title":"Spare 555 Motor 12\/24 V, 3.17 mm Shaft","description":"\u003cp\u003e\u003cstrong\u003eA spare 555-size DC motor with a 3.17 mm shaft.\u003c\/strong\u003e The size that drives most small 12 V bench drills, including the head on our $129 press.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo versions:\u003c\/strong\u003e 12 V or 24 V, both rated about 8000 rpm with no load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft 3.175 mm\u003c\/strong\u003e (1\/8 in). Body about 37 mm across and 57 mm long.\u003c\/li\u003e\n\u003cli\u003eSolder tabs at the back. Reversible: swap the two wires and it turns the other way.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sb45218cbed464979896fbf667d91cab1t.webp?v=1790330546\" alt=\"Spare 555 Motor 12\/24 V, 3.17 mm Shaft, photo 2\" width=\"800\" height=\"800\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe maker sells this same WS-555R body in several speeds, so the sticker in some photos shows a different rpm. You get the 8000 rpm version in the voltage you pick.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sfa899088ba6e46a2bdfebfe1f3e7799c1.webp?v=1790330547\" alt=\"Spare 555 Motor 12\/24 V, 3.17 mm Shaft, photo 3\" width=\"800\" height=\"800\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eBefore you order\u003c\/h3\u003e\n\u003cp\u003ePick the voltage that matches your power supply. A 12 V motor on a 24 V supply will run hot and die early. Our press runs on 3 to 12 V, so for it you want the 12 V version.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Se823b04d093e4e6b9ed20d69c2493bcfh.webp?v=1790330546\" alt=\"Spare 555 Motor 12\/24 V, 3.17 mm Shaft, photo 4\" width=\"800\" height=\"800\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eFitting it\u003c\/h3\u003e\n\u003cp\u003eMove the pulley, mounting and wiring across from your old motor. If it does not fit, send us a photo and we refund you.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked, to the United States, Australia, New Zealand and Canada alike. \u003cstrong\u003eOne to two weeks.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"ARVONELLE","offers":[{"title":"12 V, 8000 rpm \/ Motor only","offer_id":50500923359423,"sku":"100005629:200049921#12V 8000rpm;400005803:50789966#Motor","price":31.99,"currency_code":"USD","in_stock":true},{"title":"24 V, 8000 rpm \/ Motor only","offer_id":50500923621567,"sku":"100005629:200172960#24V 8000rpm;400005803:50789966#Motor","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sfa8f9834be2c4e54b2414c95b36a9073V.webp?v=1790330546"},{"product_id":"xy-stage-mounting-plate-60-x-60-mm","title":"XY Stage Mounting Plate 60 x 60 mm","description":"\u003cp\u003eThe piece that joins a 60 mm XY stage to your drill press base. Screw the plate down, set the stage on top, and the stage stays exactly where you put it while you wind the work under the bit.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMachined aluminum, 60 x 60 mm\u003c\/li\u003e\n\u003cli\u003eCountersunk corner holes to fix the plate down, tapped holes in the middle for the stage\u003c\/li\u003e\n\u003cli\u003eMade to match 40, 50 and 60 mm fine-adjustment stages\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe stage in the photos is shown for scale and sold separately.\u003c\/p\u003e\u003ch3\u003eDelivery\u003c\/h3\u003e\u003cp\u003eFree and tracked to the United States, Australia, New Zealand and Canada. \u003cstrong\u003eOne to two weeks.\u003c\/strong\u003e 30-day returns from the day it arrives.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"Default Title","offer_id":67503192146111,"sku":"MB-XYPLATE-60","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/IMG_3554.jpg?v=1790880904"},{"product_id":"vise-clamp-plate-60-mm-with-brass-hold-downs","title":"Vise Clamp Plate 60 mm with Brass Hold-Downs","description":"\u003cp\u003eHolds a small vise or a flanged fixture down on a 60 mm stage or base without drilling anything. Two brass hold-downs press on the vise's flange. Loosen two screws, slide the vise to where you want it, tighten, and it's locked.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMachined aluminum plate, 60 x 60 mm, with corner holes for fixing it down\u003c\/li\u003e\n\u003cli\u003eTwo brass hold-down bars with their screws\u003c\/li\u003e\n\u003cli\u003eBrass grips firmly without marking the vise\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe vise in the photos is shown for scale and sold separately.\u003c\/p\u003e\u003ch3\u003eDelivery\u003c\/h3\u003e\u003cp\u003eFree and tracked to the United States, Australia, New Zealand and Canada. \u003cstrong\u003eOne to two weeks.\u003c\/strong\u003e 30-day returns from the day it arrives.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"Default Title","offer_id":67503192506559,"sku":"MB-VISECLAMP-60","price":57.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/57561884-5ED9-41CD-B24A-F5824C9B4DF3.png?v=1790880954"},{"product_id":"centre-drill-for-a-mini-drill-press-1-5-mm-tip","title":"Center Drill 1.5 mm Tip for Mini Drill Press","description":"\u003cp\u003eA twist drill set down on a flat face skates before it bites. On a small press you see it as a hole that lands half a millimeter off your mark. A center drill doesn't skate. It is short and stiff, with a 60° point, and it cuts a cone exactly where you put it. Your drill bit then drops into that cone and follows it straight down.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sc6e01b65e5944a8c9888031800dcb91c1.webp?v=1791161892\" alt=\"HSS center drill, 60 degree tip, close-up\" width=\"1000\" height=\"1000\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003cp\u003eSpot the hole with the center drill, just deep enough that the cone is as wide as the bit that comes next. Swap to your drill bit. Same spot, straight hole.\u003c\/p\u003e\n\u003cp\u003eGood in brass, aluminum, plastics and PCB.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sd45e70f5ac3d4e5dbf60d8f76ba61c29L.webp?v=1791161892\" alt=\"Center drill size chart\" width=\"1000\" height=\"1000\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eSize and fit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTip: 1.5 mm, 60° cone\u003c\/li\u003e\n\u003cli\u003eBody: 4 mm. Fits the chuck on our Mini drill press (0.3 to 4 mm) and the B10 keyed chuck\u003c\/li\u003e\n\u003cli\u003eDouble-ended: when one tip dulls, turn it round\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked to the United States, Australia, New Zealand and Canada. One to two weeks. 30-day returns from the day it arrives.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"Default Title","offer_id":67505286840511,"sku":"MB-CENTREDRILL-15","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sae65c31deea74996a9b2b4e13f273e33g.webp?v=1790462934"},{"product_id":"xyr-micrometer-stage-60-mm-with-360-degree-rotary-table","title":"XYR Micrometer Stage 60 mm, 360 Degree Rotary","description":"\u003cp\u003e\u003cstrong\u003eSide to side, front to back, and round. Three moves, one block, and the part never leaves the clamp.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S7a3c4949aacc4aedada6aa9550fff64bP.webp?v=1791159791\" alt=\"XYR micrometer stage 60 mm with 360 degree rotary table, front view\" width=\"1000\" height=\"1000\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eAn XY stage lines a hole up with the bit. A rotary table turns the work to an angle. This stage does both: two micrometer-driven slides for X and Y, with a 60 mm rotary table on top that turns a full 360 degrees and locks where you set it. Put a small vise on the round table and you can drill a bolt circle, index holes at 15 degrees, or nudge a mark into line under the bit by a hundredth of a millimeter, all without unclamping.\u003c\/p\u003e\n\u003ch3\u003eThe numbers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e60 x 60 mm\u003c\/strong\u003e base, \u003cstrong\u003e60 mm\u003c\/strong\u003e round rotary table on top, \u003cstrong\u003e51 mm\u003c\/strong\u003e tall overall.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eX and Y travel: 6.5 mm each way\u003c\/strong\u003e, read on micrometer heads in \u003cstrong\u003e0.01 mm\u003c\/strong\u003e steps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotation: 360 degrees\u003c\/strong\u003e, with a graduated scale around the table and a lock screw.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTapped holes in the rotary table:\u003c\/strong\u003e one M5 in the center, plus rings of M4 and M3, each 6 mm deep. That is where a small vise, a clamp plate or a fixture bolts on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad: 3 kgf.\u003c\/strong\u003e Aluminum body, black finish, steel ball guides.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere it fits in\u003c\/h3\u003e\n\u003cp\u003eThis is the fine-positioning layer of a small bench setup: machine on the base, this stage on the table, the vise on top. It is built for positioning, so it pairs with drilling, marking and inspection, the jobs where the part has to be exactly where you meant it.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked, to the United States, Australia, New Zealand and Canada alike. \u003cstrong\u003eTwo to three weeks.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"Default Title","offer_id":67531304108223,"sku":"MB-XYR-STAGE-60","price":219.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S8a7e52c30dea4ffbae7c48edc0cfe893F.webp?v=1790790470"},{"product_id":"aluminium-mini-vise-with-v-groove-jaws-34-39-or-59-mm","title":"Aluminum Mini Vise with V-Groove Jaws","description":"\u003cp\u003e\u003cstrong\u003eA small, light, square-sided vise that bolts down flat: onto a stage, a base plate, or the bench.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Sb22cae6033784534980197176cd24b47X.webp?v=1790790950\" alt=\"34 mm jaw vise with dimensions\" width=\"950\" height=\"950\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eMachined aluminum body, a steel lead screw with a knurled knob, and jaws with a \u003cstrong\u003eV-groove cut across them\u003c\/strong\u003e, so a pin, a drill blank or a round shaft sits centered instead of rolling. Flat parts sit on the jaw faces as usual. Counterbored holes in the body take the screws that hold it down, and it comes with its own M5 screws and T-nuts.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S4419fe87dfe449e89a816a5d82b75c7c0.webp?v=1790790950\" alt=\"39 mm jaw vise with dimensions\" width=\"950\" height=\"950\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eThree sizes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e34 mm jaws\u003c\/strong\u003e (teal): opens to 39 mm, body 90 mm long, 25 mm tall. The one for a 40 or 60 mm stage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e39 mm jaws\u003c\/strong\u003e (red): opens to 50 mm, body 100 mm long, 29 mm tall.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e59 mm jaws\u003c\/strong\u003e (red): opens to 100 mm, body 180 mm long, about 650 g. For a base plate or the bench.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/Se43150ccd90243259d6960c55dce673dZ.webp?v=1790790950\" alt=\"59 mm jaw vise with dimensions\" width=\"950\" height=\"950\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eWhere it fits in\u003c\/h3\u003e\n\u003cp\u003eThis is the top layer of a small setup: machine, then a stage for position, then this to hold the part square under the bit.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked, to the United States, Australia, New Zealand and Canada alike. \u003cstrong\u003eOne to two weeks.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"Mikrabench","offers":[{"title":"34 mm jaws","offer_id":67531311841471,"sku":"MB-VISE-ALU-34","price":39.0,"currency_code":"USD","in_stock":true},{"title":"39 mm jaws","offer_id":67531311874239,"sku":"MB-VISE-ALU-39","price":44.0,"currency_code":"USD","in_stock":true},{"title":"59 mm jaws","offer_id":67531311907007,"sku":"MB-VISE-ALU-59","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/S14829a9c0695447990efb608838ca3572.webp?v=1790790950"},{"product_id":"xyzr-4-axis-micrometer-stage-60mm-rotary","title":"XYZR Micrometer Stage 60mm with Rotary Table, Precision XY Table for Mini Drill Press","description":"\u003cp\u003e\u003cstrong\u003eX, Y and Z by micrometer, plus a round table on top that turns a full 360°. One block sets the part exactly where the bit needs it, at the angle you want.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/IMG-3926.jpg?v=1791082269\" alt=\"XYZR micrometer stage, X Y and Z micrometer heads\" width=\"1297\" height=\"1299\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eFour stages stacked into one: two sliding stages for X and Y, a lifting stage for Z, and a rotary table on top. Each linear axis has its own micrometer head, every division on the thimble is a hundredth of a millimeter. The rotary table has a degree scale around its edge and a micrometer for fine tuning about ±5°, so you can set an angle by eye and then nudge it by a fraction of a degree.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/IMG-3927.jpg?v=1791082269\" alt=\"Rotary table degree scale and fine-tuning micrometer\" width=\"602\" height=\"549\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable 60 x 60 mm,\u003c\/strong\u003e round rotary top 60 mm across with threaded holes for a small vise or clamp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTravel:\u003c\/strong\u003e X and Y about ±6.5 mm, Z about ±10 mm, rotation 360°. It is for fine positioning, not for moving a part across the bench.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReading 0.01 mm,\u003c\/strong\u003e accuracy 0.03 mm, load up to 3 kg.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight 80 mm, weight 0.91 kg.\u003c\/strong\u003e Four mounting holes in the base, 50 mm apart.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum body, black finish,\u003c\/strong\u003e crossed-roller guides, a lock screw on every axis.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/IMG-3928.jpg?v=1791082269\" alt=\"Micrometer head, 0.01 mm divisions\" width=\"608\" height=\"545\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eGood for\u003c\/h3\u003e\n\u003cp\u003eDrilling holes on a bolt circle, cross-drilling small shafts, watch and clock parts, PCB and model work, and lining up a part under a microscope or a loupe.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/IMG-3929.jpg?v=1791082269\" alt=\"Axis lock screw\" width=\"591\" height=\"535\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eBefore you order\u003c\/h3\u003e\n\u003cp\u003eThe whole block stands 80 mm tall. Measure the gap between the chuck and the base on your machine; on a small column press the head can usually be raised to make room. If you do not need rotation, the \u003ca href=\"\/products\/xyz-micrometer-stage-mini-drill-press\"\u003eXYZ stage\u003c\/a\u003e is lower and costs less.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked within the United States. \u003cstrong\u003eOne to two weeks.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"ARVONELLE","offers":[{"title":"Default Title","offer_id":67542997598399,"sku":"MB-XYZR-60","price":269.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/IMG-3925.jpg?v=1791082269"},{"product_id":"x-axis-micrometer-stage-40mm","title":"X-Axis Micrometer Stage 40 mm, Single-Axis Fine Adjustment Slide","description":"\u003cp\u003e\u003cstrong\u003eOne axis, one micrometer, a hundredth of a millimeter per division. The simplest way to move a part by an exact amount.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA low, solid slide with a 40 x 40 mm top. Turn the micrometer and the table moves in a straight line on crossed-roller guides, with no play and no wobble. Lock it with the knurled screw on the side when it is where you want it.\u003c\/p\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/FullSizeRender_45607cea-a66e-493a-961c-8e1afa0c56ba.jpg?v=1791084717\" alt=\"X-axis stage dimensions 72 x 66 x 24 mm\" width=\"1320\" height=\"915\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable 40 x 40 mm,\u003c\/strong\u003e threaded holes on top for a small vise, a clamp or a fixture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTravel ±6.5 mm,\u003c\/strong\u003e reading 0.01 mm on the micrometer thimble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnly 24 mm tall,\u003c\/strong\u003e 72 x 66 mm overall with the micrometer, so it fits under almost any small drill press.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraightness 3 µm,\u003c\/strong\u003e load up to 2 kg.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum body, black finish,\u003c\/strong\u003e crossed-roller guides, lock screw.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"avimg\" style=\"text-align:center;margin:24px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/FullSizeRender_c6548b80-e33c-4218-b11d-11712bf6f061.jpg?v=1791084707\" alt=\"Single-axis linear stage 40 x 40 mm, crossed-roller guides\" width=\"1302\" height=\"1236\" loading=\"lazy\" style=\"width:100%;max-width:600px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eGood for\u003c\/h3\u003e\n\u003cp\u003eSpacing a row of holes on a mini drill press, setting a part under a microscope or loupe, positioning a probe, a camera or a laser, and building your own XY table: stack two of them at right angles.\u003c\/p\u003e\n\u003cp\u003eNeed more axes? See the \u003ca href=\"\/products\/xyz-micrometer-stage-mini-drill-press\"\u003eXYZ stage\u003c\/a\u003e and the \u003ca href=\"\/products\/xyzr-4-axis-micrometer-stage-60mm-rotary\"\u003eXYZR stage with a rotary table\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eFree and tracked within the United States. \u003cstrong\u003eOne to two weeks.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"ARVONELLE","offers":[{"title":"Default Title","offer_id":67543045046463,"sku":"MB-XSTAGE-40","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/FullSizeRender_6b4f12b4-c9b0-49ca-9ea6-0eab496b3630.jpg?v=1791084692"},{"product_id":"er11-collet-set-7-pieces-1-7mm","title":"ER11 Collet Set, 7 Collets 1 to 7 mm, Spring Collets for ER11 Chuck","description":"\u003cp\u003e\u003cstrong\u003eSeven ER11 spring collets, one for every millimetre from 1 to 7 mm. Fits any ER11 chuck on a mini drill press, engraver, mini mill or CNC router spindle.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn ER collet grips the whole shank evenly, so a small bit runs straighter than in a three-jaw chuck. With the full set from 1 to 7 mm you can hold drill bits, burrs, end mills and engraving cutters in metric and most imperial sizes.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSizes:\u003c\/strong\u003e 1, 2, 3, 4, 5, 6 and 7 mm. Each collet also closes about 0.5 mm below its size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eER11 standard:\u003c\/strong\u003e about 11.5 mm across, 18 mm tall.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring steel\u003c\/strong\u003e, slotted from both ends for an even grip.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eYou need an ER11 chuck or spindle with its nut; the nut is not included.\u003c\/p\u003e\u003ch3\u003eDelivery\u003c\/h3\u003e\u003cp\u003eUnited States only. Free and tracked, ships from New Jersey, \u003cstrong\u003eusually 4 to 8 business days.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e30-day returns from the day it arrives. Return postage is yours, the price of the item comes back in full.\u003c\/p\u003e","brand":"ARVONELLE","offers":[{"title":"Default Title","offer_id":67545586860223,"sku":"MB-ER11-COLLET-7","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/files\/s-l1600_6541fe1a-c4b6-499c-8079-be5de9bcd705.jpg?v=1791134278"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0760\/5826\/3743\/collections\/Sbc0b4bfd89974959896810cefed3f4c8B.webp?v=1789744850","url":"https:\/\/arvonelle.com\/collections\/drill-press.oembed?page=2","provider":"ARVONELLE","version":"1.0","type":"link"}